Abstract
The proposed technique demonstrates a fiber ring resonator interrogated by an optical time domain reflectometer (OTDR), for intensity sensing. By using this methodology, a cavity round trip time of 2.85 μs was obtained. For a proof of concept, a long-period grating was inserted in the resonant cavity operating as a curvature sensing device. A novel signal processing approach was outlined, regarding to the logarithmic behavior of the OTDR. Through analyzing the experimental results, an increase in the measured sensitivities was obtained by increasing applied bending. With curvatures performed from 1.8 m−1 to 4.5 m−1, the sensitivity values ranged from 2.94 dB·km−1 to 5.15 dB·km−1. In its turn, the sensitivities obtained presented a linear behavior when studied as a function of the applied curvature, following a slope of 0.86×10−3 dB. The advantages of applying this technique were also discussed, demonstrating two similar fiber rings multiplexed in a series of configurations.
Article PDF
Similar content being viewed by others
References
H. Izumita, S. I. Furukawa, Y. Koyamada, and I. Sankawa, “Fading noise reduction in coherent OTDR,” IEEE Photonics Technology Letters, 1992, 4(2): 201–203.
K. Shimizu, T. Horiguchi, and Y. Koyamada, “Characteristics and reduction of coherent fading noise in Rayleigh backscattering measurement for optical fibers and components,” Journal of Lightwave Technology, 1992, 10(7): 982–987.
A. Küng, J. Budin, L. Thévenaz, and P. A. Robert, “Optical fiber ring resonator characterization by optical time-domain reflectometry,” Optics Letters, 1997, 22(2): 90–92.
A. Küng, J. Budin, L. Thévenaz, and P. A. Robert, “Rayleigh fiber optics gyroscope,” IEEE Photonics Technology Letters, 1997, 9(7): 973.
L. B. Yuan, Z. H. Liu, and J. Yang, “Rayleigh backscattering fiber optic rotation sensor based on combined two-ring-resonator,” Sensors and Actuators A: Physical, 2007, 136(1): 216–220.
M. Giraldi, C. Fernandes, M. Ferreira, M. J. de Sousa, P. Jorge, J. Costa, et al., “Fiber loop mirror sensors interrogated and multiplexed by OTDR”, Journal of Lightwave Technology, 2015, 33(12): 2580–2584.
O. Frazão, R. Falate, J. M. Baptista, J. L. Fabris, and J. L. Santos, “Optical bend sensor based on a long-period fiber grating monitored by an optical time-domain reflectometer,” Optical Engineering, 2005, 44(11): 110502–110502.
M. Giraldi, C. Fernandes, M. S. Ferreira, M. J. de Sousa, P. Jorge, J. C. Costa, et al., “Fiber optic displacement sensor based on a double-reflecting OTDR technique,” Microwave and Optical Technology Letters, 2015, 57(6): 1312–1315.
A. D. Kersey, M. A. Davis, and T. Tsai, “Fiber optic Bragg grating strain sensor with direct reflectometric interrogation,” in Proceeding of Eleventh International Conference on Optical Fiber Sensors, Sapporo, Japan, 1996, pp: Th45.
S. Silva, E. G. P. Pachon, M. A. R. Franco, P. Jorge, J. L. Santos, F. X. Malcata, et al., “Curvature and temperature discrimination using multimode interference fiber optic structures-a proof of concept,” Journal of Lightwave Technology, 2012, 30(23): 3569–3575.
Acknowledgment
This work is financed by National Funds through the Portuguese funding agency, FCT — “Fundação para a Ciência e a Tecnologia” under Grant No. UID/EEA/50014/2019.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Magalhães, R., Silva, S. & Frazão, O. Curvature Sensor Based on a Long-Period Grating in a Fiber Ring Resonator Interrogated by an OTDR. Photonic Sens 10, 1–6 (2020). https://doi.org/10.1007/s13320-019-0398-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-019-0398-3