Abstract
The chapter describes review of the industrial CPA applications. Practical aspects of the real control quality assessment project are presented. The aspects of the Cyber Physical Systems are addressed together with the cyber security. The concludes with the list of the available CPA software and reported information about industrial CPA applications.
Achievement is talent plus preparation.
– Malcolm Gladwell
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arjomandi, R.K.: Statistical methods for control loop performance assessment. In: 2011 International Conference on Communications, Computing and Control Applications (CCCA), pp. 1–6 (2011)
Bai, J., Li, Y., Chen, J.: Real-time performance assessment and adaptive control for a water chiller unit in an HVAC system. In: IOP Conference Series: Earth and Environmental Science, vol. 121, no. 005, p. 052 (2018)
Belli, P., Bonavita, N., Rea, R.: An integrated environment for industrial control performance assessment, diagnosis and improvement. In: Proceedings of the International Congress on Methodologies for Emerging Technologies in Automation (ANIPLA) (2006)
Bode, C.A., Ko, B.S., Edgar, T.F.: Run-to-run control and performance monitoring of overlay in semiconductor manufacturing. Control Eng. Pract. 12(7), 893–900 (2004). pC-B02-Process Control IFAC 2002
Botelho, V.R., Trierweiler, J.O., Farenzena, M., Longhi, L.G.S., Zanin, A.C., Teixeira, H.C.G., Duraiski, R.G.: Model assessment of mpcs with control ranges: an industrial application in a delayed coking unit. Control Eng. Pract. 84, 261–273 (2019)
Campbell, I., Uduehi, D., Ordys, A., van der Molen, G.: pH process control system benchmarking. In: Proceedings of the 2001 American Control Conference, vol. 6, pp. 4332–4335 (2001)
di Capaci, R.B., Scali, C., Pestonesi, D., Bartaloni, E.: Advanced diagnosis of control loops: experimentation on pilot plant and validation on industrial scale. IFAC Proc. 46(32), 589–594 (2013). 10th IFAC International Symposium on Dynamics and Control of Process Systems
Chen, J., Wang, W.Y.: Performance assessment of multivariable control systems using PCA control charts. In: 2009 4th IEEE Conference on Industrial Electronics and Applications, pp. 936–941 (2009)
Clarke, J.A., Cockroft, J., Conner, S., Hand, J.W., Kelly, N.J., Moore, R., O’Brien, T., Strachan, P.: Simulation-assisted control in building energy management systems. Energy Build. 34(9), 933–940 (2002)
Crnjac, M., Veza, I., Banduka, N.: From concept to the introduction of industry 4.0. Int. J. Ind. Eng. Manag. 8, 21–30 (2017)
Domański, P.D., Golonka, S., Jankowski, R., Kalbarczyk, P., Moszowski, B.: Control rehabilitation impact on production efficiency of ammonia synthesis installation. Ind. Eng. Chem. Res. 55(39), 10366–10376 (2016)
Du, G.X., Quan, Q., Xi, Z., Liu, Y., Cai, K.Y.: A control performance index for multicopters under off-nominal conditions, arXiv:1705.08775v2, Cornell University Library (2017)
Dziuba, K., Góra, R., Domański, P.D., Ławryńczuk, M.: Multicriteria control quality assessment for ammonia production process (in Polish). In: Zalewska, A. (ed.) 1st Scientific and Technical Conference Innovations in the Chemical Industry, Warszawa, Poland, pp. 80–90 (2018)
Farenzena, M., Trierweiler, J.O.: LoopRank: a novel tool to evaluate loop connectivity. IFAC Proc. Vol. 42(11), 964–969 (2009). 7th IFAC Symposium on Advanced Control of Chemical Processes
Gao, J., Patwardhan, R., Akamatsu, K., Hashimoto, Y., Emoto, G., Shah, S.L., Huang, B.: Performance evaluation of two industrial mpc controllers. Control. Eng. Pract. 11(12), 1371–1387 (2003). 2002 IFAC World Congress
Gao, X., Yang, F., Shang, C., Huang, D.: A review of control loop monitoring and diagnosis: prospects of controller maintenance in big data era. Chin. J. Chem. Eng. 24(8), 952–962 (2016)
Gonzalez, R., Qi, F., Huang, B.: Process Control System Fault Diagnosis: A Bayesian Approach. Wiley, Chichester, UK (2016)
Gupta, P., Guenther, K., Hodgkinson, J., Jacklin, S., Richard, M., Schumann, J., Soares, F.: Performance monitoring and assessment of neuro-adaptive controllers for aerospace applications using a Bayesian approach. In: Proceedings of the AIAA Guidance, Navigation, and Control Conference and Exhibit, AIAA 2005, San Francisco, CA, USA, p. 6451 (2005)
Haarsma, G.J., Nikolaou, M.: Multivariate controller performance monitoring: Lessons from an application to a snack food process. In: AIChE Annual Meeting (1999)
Harris, T.J., Seppala, C.T., Jofriet, P.J., Surgenor, B.W.: Plant-wide feedback control performance assessment using an expert-system framework. Control Eng. Pract. 4(9), 1297–1303 (1996)
Hölttä, V.: Plant performance evaluation in complex industrial applications. Ph.D. thesis, Helsinki University of Technology, Control Engineering, Espoo, Finland (2009)
Hoo, K.A., Piovoso, M.J., Schnelle, P.D., Rowan, D.A.: Process and controller performance monitoring: overview with industrial applications. Int. J. Adapt. Control Signal Process. 17(7–9), 635–662 (2003)
Howard, R., Cooper, D.: A novel pattern-based approach for diagnostic controller performance monitoring. Control Eng. Pract. 18(3), 279–288 (2010)
Huang, B.: Bayesian methods for control loop monitoring and diagnosis. J. Process Control 18(9), 829–838 (2008). Selected Papers From Two Joint Conferences: 8th International Symposium on Dynamics and Control of Process Systems and the 10th Conference Applications in Biotechnology
Huang, B., Shah, S.L., Kwok, K.E., Zurcher, J.: Performance assessment of multivariate control loops on a paper-machine headbox. Can. J. Chem. Eng. 75(1), 134–142 (1997)
Ikuma, L.H., Koffskey, C., Harvey, C.M.: A human factors-based assessment framework for evaluating performance in control room interface design. IIE Trans. Occup. Ergon. Hum. Factors 2(3–4), 194–206 (2014)
Ingimundarson, A., Hägglund, T.: Closed-loop performance monitoring using loop tuning. J. Process Control 15(2), 127–133 (2005)
Jämsä-Jounela, S.L., Poikonen, R., Halmevaara, K.: Evaluation of level control performance. In: 15th Triennial IFAC World Congress (2002)
Jelali, M.: An overview of control performance assessment technology and industrial applications. Control. Eng. Pract. 14(5), 441–466 (2006)
Jelali, M.: Performance assessment of control systems in rolling mills—application to strip thickness and flatness control. J. Process Control 17(10), 805–816 (2007)
Jelali, M.: Control Performance Management in Industrial Automation: Assessment, Diagnosis and Improvement of Control Loop Performance. Springer, London (2013)
Jiang, H., Shah, S.L., Huang, B., Wilson, B., Patwardhan, R., Szeto, F.: Performance assessment and model validation of two industrial MPC controllers. IFAC Proc. Vol. 41(2), 8387–8394 (2008)
Jiang, H., Patwardhan, R., Shah, S.L.: Root cause diagnosis of plant-wide oscillations using the concept of adjacency matrix. J. Process Control 19(8), 1347–1354 (2009). Special Section on Hybrid Systems: Modeling, Simulation and Optimization
Jofriet, P., Bialkowski, W.: The key to on-line monitoring of process variability and control loop performance. In: Proceedings Control Systems ’96, p. 187 (1996)
Khamseh, S.A., Sedigh, A.K., Moshiri, B., Fatehi, A.: Control performance assessment based on sensor fusion techniques. Control. Eng. Pract. 49, 14–28 (2016)
Knierim-Dietz, N., Hanel, L., Lehner, J.: Definition and verification of the control loop performance for different power plant types. Technical report, Institute of Combustion and Power Plant Technology, University of Stuttgart (2012)
Kozub, D.J.: Controller performance monitoring and diagnosis. Industrial perspective. IFAC Proc. Vol. 35(1), 405–410 (2002). 15th IFAC World Congress
Kozub, D.J., Garcia, C.: Monitoring and diagnosis of automated controllers in the chemical process industries. In: Proceedings of the AIChE (1993)
Krause, H.M.: Turning ideas into reality: the journey of one leading manufacturer into the industrial IoT. In: Manufacture 2017, Tallin, Estonia (2017)
Landman, R., Jämsä-Jounela, S.L.: Hybrid approach to casual analysis on a complex industrial system based on transfer entropy in conjunction with process connectivity information. Control Eng. Pract. 53(Complete), 14–23 (2016)
Landman, R., Kortela, J., Sun, Q., Jämsä-Jounela, S.L.: Fault propagation analysis of oscillations in control loops using data-driven causality and plant connectivity. Comput. Chem. Eng. 71, 446–456 (2014)
Li, S., Wang, Y.: Performance assessment of a boiler combustion process control system based on a data-driven approach. Processes 6, 200 (2018)
Li, X., Zhou, C., Tian, Y., Xiong, N., Qin, Y.: Asset-based dynamic impact assessment of cyberattacks for risk analysis in industrial control systems. IEEE Trans. Ind. Inform. 14(2), 608–618 (2018)
Lindner, B., Auret, L., Bauer, M.: Investigating the impact of perturbations in chemical processes on data-based causality analysis. Part 1: defining desired performance of causality analysis techniques. IFAC-PapersOnLine 50(1), 3269–3274 (2017). 20th IFAC World Congress
Liu, K., Chen, Y.Q., Domański, P.D., Zhang, X.: A novel method for control performance assessment with fractional order signal processing and its application to semiconductor manufacturing. Algorithms 11(7), 90 (2018)
Mäkelä, M., Manninen, V., Heiliö, M., Myller, T.: Performance assessment of automatic quality control in mill operations. In: Proceedings of Control Systems (2006)
Mason, D.G., Edwards, N.D., Linkens, D.A., Reilly, C.S.: Performance assessment of a fuzzy controller for atracurium-induced neuromuscular block. Br. J. Anaesth. 7(3), 396–400 (1996)
McNabb, C., Ruel, M.: Best practices for managing control loop performance—roadmap to success. In: Conference Proceedings from PAPTAC Annual Meeting (2009)
Meng, Q.W., Zhong, Z.F., Liu, J.Z.: A practical approach of online control performance monitoring. Chemom. Intell. Lab. Syst. 142, 107–116 (2015)
Mitchell, W., Shook, D., Shah, S.L.: A picture worth a thousand control loops: an innovative way of visualizing controller performance data. In: Invited Plenary Presentation, Control Systems (2004)
Nissinen, A., Nuyan, S.: Performance improvements and sustainability through a remote monitoring, analysis, and warning system—benchmarking performance for long-term stability. In: Tappi PaperCon 2012 Conference (2012)
Oborski, P.: Social-technical aspects in modern manufacturing. Int. J. Adv. Manuf. Technol. 22(11), 848–854 (2003)
O’Neill, Z., Li, Y., Williams, K.: HVAC control loop performance assessment: a critical review (1587-RP). Sci. Technol. Built Environ. 23(4), 619–636 (2017)
Paulonis, M.A., Cox, J.W.: A practical approach for large-scale controller performance assessment, diagnosis and improvement. J. Process Control 13(2), 155–168 (2003)
Pillay, N., Govender, P., Maharaj, O.: Controller performance assessment of servomechanisms for nonlinear process control systems. In: Proceedings of the World Congress on Engineering and Computer Science (WCECS), vol. II (2014)
Prabhu, A.V.: Performance monitoring of run-to-run control systems used in semiconductor manufacturing. Ph.D. thesis, University of Texas at Austin, US (2008)
Rojko, A.: Industry 4.0 concept: Background and overview. Int. J. Interact. Mob. Technol. 11(5) (2017)
Salahshoor, K., Arjomandi, R.K.: Comparative evaluation of control loop performance assessment schemes in an industrial chemical process plant. In: 2010 Chinese Control and Decision Conference, pp. 2603–2608 (2010)
Salahshoor, K., Karimi, I., Fazel, E.N., Beitari, H.: Practical design and implementation of a control loop performance assessment package in an industrial plant. In: Proceedings of the 30th Chinese Control Conference, pp. 5888–5893 (2011)
Seem, J.E., House, J.M.: Integrated control and fault detection of air-handling units. HVAC R Res. 15(1), 25–55 (2009)
Shneiderman, B.: Tree visualization with treemaps: a 2-D space-filling approach. ACM Trans. Graph. 11(1), 92–99 (1992)
Streicher, S.J., Wilken, S.E., Sandrock, C.: Eigenvector analysis for the ranking of control loop importance. In: Klemeš, J.J., Varbanov, P.S., Liew, P.Y. (eds.) 24th European Symposium on Computer Aided Process Engineering, Computer Aided Chemical Engineering, vol. 33, pp. 835–840. Elsevier (2014)
Tang, C.Y.: Key performance indicators for process control system cybersecurity performance analysis. Technical Report NISTIR 8188, National Institute of Standards and Technology (NIST), U.S. Department of Commerce (2018)
Thornhill, N.F., Sadowski, R., Davis, J.R., Fedenczuk, P., Knight, M.J., Prichard, P., Rothenberg, D.: Practical experiences in refinery control loop performance assessment. In: UKACC International Conference on Control ’96 (Conf. Publ. No. 427), vol. 1, pp. 175–180(1996)
Thornhill, N.F., Oettinger, M., Fedenczuk, P.: Refinery-wide control loop performance assessment. J. Process Control 9(2), 109–124 (1999)
Veronesi, M., Visioli, A.: An industrial application of a performance assessment and retuning technique for PI controllers. ISA Trans. 49(2), 244–248 (2010)
Wang, J., Wang, Y.: Control performance assessment for ILC-controlled batch processes based on MPC benchmark. In: 2018 IEEE 7th Data Driven Control and Learning Systems Conference, pp. 129–134 (2018)
Wang, J., He, Q.P., Edgar, T.F.: Control performance assessment and diagnosis for semiconductor processes. In: Proceedings of the 2010 American Control Conference, pp. 7004–7009 (2010)
Wang, J., Su, J., Zhao, Y., Pang, X., Li, J., Bi, Z.: Performance assessment of primary frequency control responses for thermal power generation units using system identification techniques. Int. J. Electr. Power Energy Syst. 100, 81–90 (2018a)
Wang, J., Pang, X., Gao, S., Zhao, Y., Cui, S.: Assessment of automatic generation control performance of power generation units based on amplitude changes. Int. J. Electr. Power Energy Syst. 108, 19–30 (2019)
Wang, Y., Gao, Y., Su, W., Zheng, W., Jiang, X., Huang, Q.: The control system assessment based on a class of disturbance characteristics. In: 2018 37th Chinese Control Conference, pp. 8596–8600 (2018b)
Wang, Y., Zhang, H., Wei, S., Zhou, D., Huang, B.: Control performance assessment for ILC-controlled batch processes in a 2-D system framework. IEEE Trans. Syst. Man Cybern. Syst. 48(9), 1493–1504 (2018c)
Wei, D.: Development of performance functions for economic performance assessment of process control systems. Ph.D. thesis, Faculty of Engineering, Built Environment and Information Technology, University of Pretoria (2010)
Wu, Z., Ran, Z., Xu, Q., Wang, W.: Dynamic performance monitoring of current control system for fused magnesium furnace driven by big data. In: 2018 IEEE International Conference on Consumer Electronics-Taiwan, pp. 1–2 (2018)
Yang, F., Xiao, D.: Progress in root cause and fault propagation analysis of large-scale industrial processes. J. Control Sci. Eng. 478, 373 (2012)
Yuan, H.: Process analysis and performance assessment for sheet forming processes. Ph.D. thesis, Queen’s University, Kingston, Ontario, Canada (2015)
Yuan, T., Qin, S.J.: Root cause diagnosis of plant-wide oscillations using granger causality. J. Process Control 24(2), 450–459 (2014). aDCHEM 2012 Special Issue
Zhao, F., Fan, J., Mijanovic, S.: Pi auto-tuning and performance assessment in HVAC systems. In: 2013 American Control Conference, pp. 1783–1788 (2013)
Zheng, Y., Qin, S.J., Barham, M.: Control performance monitoring of excessive oscillations of an offshore production facility. IFAC Proc. 45(8), 25–32 (2012). 1st IFAC Workshop on Automatic Control in Offshore Oil and Gas Production
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Domański, P.D. (2020). CPA Industrial Applications . In: Control Performance Assessment: Theoretical Analyses and Industrial Practice. Studies in Systems, Decision and Control, vol 245. Springer, Cham. https://doi.org/10.1007/978-3-030-23593-2_15
Download citation
DOI: https://doi.org/10.1007/978-3-030-23593-2_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-23592-5
Online ISBN: 978-3-030-23593-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)