Abstract
Additive manufacturing (AM) is considered the new industrial revolution due to its impact in the way parts are manufactured. Research vast majority is focused on technology development based on different processes. However, recent trends show a big pushed for materials development and testing. Most of the thermoplastic used in AM are petroleum based, a limited and nonrenewable resource, however, bioplastics such as polylactic acid (PLA) have gained traction as a competitor. In this research, PLA was mixed with woodflour into different matrices to evaluate the particle size effect, species (maple and pine) and concentration (woodflour amount) in the biopolymer and 3D printed parts performance. Thermal, mechanical, structural properties were studied for the different matrices created. Results showed the potential of using woodflour as an additive to enhance bioplastics, maintaining sustainability aspects and changing the biopolymer to be suitable for AM.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Stratasys. 3D printing with FDM. White paper (2018)
Huang, S.H., Liu, P., Mokasdar, A., Hou, L.: Additive manufacturing and its societal impact: a literature review. Int. J. Adv. Manuf. Technol. 67, 1191–1203 (2013)
Holmstrm, J., Partanen, J., Tuomi, J., Walter, M.: Rapid manufacturing in the spare parts supply chain: alternative approaches to capacity deployment. J. Manuf. Technol. Manag. 21(6), 687–697 (2010)
Khajavi, S.H., Partanen, J., Holmström, J.: Additive manufacturing in the spare parts supply chain. Comput. Ind. 65, 50–63 (2014)
Wong, K.V., Hernandez, A.: A review of additive manufacturing. ISRN Mech. Eng. 2012, 10 p. (2012)
Horn, T.J., Harrysson, O.L.A.: Overview of current additive manufacturing technologies and selected applications. Sci. Prog. 95(3), 255 (2012)
Petrick, I.J., Simpson, T.W.: 3D printing disrupts manufacturing: how economies of one create new rules of competition. Res.-Technol. Manag. 56(6), 12–16 (2013)
Schubert, C., Van Langeveld, M.C., Donoso, L.A.: Innovations in 3D printing: a 3D overview from optics to organs. Br. J. Ophthalmol. 98(2), 159–161 (2013). 304446
Weller, C., Kleer, R., Piller, F.T.: Economic implications of 3D printing: market structure models in light of additive manufacturing revisited. Int. J. Prod. Econ. 164, 43–56 (2015)
Saloni, D., Mervine, N.: Investigation of bioplastics for additive manufacturing. In: Di Nicolantonio, M., Rossi, E., Alexander, T. (eds.) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping, AHFE 2019. Advances in Intelligent Systems and Computing, vol 975. Springer, Cham (2020)
Goodship, V., Middleton, B., Cherrington, R.: Design and Manufacture of Plastic Components for Multifunctionality Electronic Resource: Structural Composites, Injection Molding, and 3D Printing. William Andrew, Amsterdam (2016)
Yang, Y., Chen, X., Lu, N., Gao, F.: Injection Molding Process Control, Monitoring, and Optimization Electronic Resource. Hanser Publishers, Munich (2017)
Lunt, J.: Large-scale production, properties and commercial applications of polylactic acid polymers. Polym. Degrad. Stab. 59(1–3), 145–152 (1998)
Álvarez-Chávez, C.R., Edwards, S., Moure-Eraso, R., Geiser, K.: Sustainability of bio-based plastics: general comparative analysis and recommendations for improvement. J. Clean. Prod. 23, 47–56 (2012)
Mülhaupt, R.: Green polymer chemistry and bio-based plastics: dreams and reality. Macromol. Chem. Phys. 214(2), 159–174 (2013)
Murphy, C.A., Collins, M.N.: Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing. Polym. Compos. 39(4), 1311–1320 (2016)
Q20A/Q2000 DSC Unpacking. http://www.tainstruments.com/q20aq2000-unpack/. Accessed 3 May 2018
Torture Test by MAKE. https://www.thingiverse.com/thing:33902. Accessed 3 May 2018
Suryanegara, L., Nakagaito, A.N., Yano, H.: The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites. Compos. Sci. Technol. 69, 1187–1192 (2009)
Saloni, D., Mervine, N., Verdi, C.: Design and development of biopolymers for additive manufacturing. In: Proceedings of the Industrial and Systems Engineering Conference, Orlando, Fl (2018)
Calignano, F., Manfredi, D., Ambrosio, E.P., Biamino, S., Lombardi, M., Atzeni, E., et al.: Overview on additive manufacturing technologies. Proc. IEEE 105(4), 593–612 (2017)
Acknowledgements
Authors want to thank Lignetics for providing the woodflour for this research. Also, “This work was performed in part at the Analytical Instrumentation Facility (AIF) at NCSU, which is supported by the State of North Carolina and the National Science Foundation (award number ECCS-1542015). The AIF is a member of the North Carolina Research Triangle Nanotechnology Network (RTNN), a site in the National Nanotechnology Coordinated Infrastructure (NNCI).”
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
McLaughlin, K., Webb, A., Brӓtt, K., Saloni, D. (2020). Bioplastic Modified with Woodflour for Additive Manufacturing. In: Mrugalska, B., Trzcielinski, S., Karwowski, W., Di Nicolantonio, M., Rossi, E. (eds) Advances in Manufacturing, Production Management and Process Control. AHFE 2020. Advances in Intelligent Systems and Computing, vol 1216. Springer, Cham. https://doi.org/10.1007/978-3-030-51981-0_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-51981-0_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-51980-3
Online ISBN: 978-3-030-51981-0
eBook Packages: EngineeringEngineering (R0)