Abstract
Gears are an important design component of many machines and mechanisms. The most important characteristics of machines and mechanisms, namely their accuracy and smoothness of operation, power density, and so forth, strongly depend on gears. These are the main reasons for the requirements to gears, including but not limited to their accuracy, as well as the productivity of their production, which are permanently growing. In production of gears hobs are used most extensively. High productivity of the gear hobbing process along with the economic performance of the gear generators is the main reason for that. Despite of that, further increase in productivity of the gear hobbing and the gear finishing operations is still required.
Hobs, worm-type shavers, worm-type grinding wheels, and so forth are among the gear cutting tools that are commonly used in gear production. Further analysis and improvements are necessary to succeed in the nowadays gear business. The text below aimed investigation and further improvements in gear cutting tool design, and in production of gears.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Uskov M.K., Parkhomenko A.A. (1980) Razvitiye teorii i praktiki sovetskogo mashinovedeniya. [The development of the theory and practice of Soviet mechanical engineering] M. Nauka. 191 S. [Russia].
Zubchatyye peredachi. (2016) Normativnoye obespecheniye tochnosti zubchatykh peredach na etape proyektirovaniya. [Gears. Regulatory support for gear accuracy at the designing stage] /Antonyuk i dr. Minsk. Izd-vo Belarusskaya nauka. 251 S. [Belarus].
Vereshchaka A.S., Tret'yakov I.P. (1986) Rezhushchiye instrumenty s iznosostoykimi pokrytiyami. [Cutting tools with wear-resistant coatings] M. Mashinostroyeniye. 192 S. [Russia].
Kharlampiyev I.S. (1981) Obkatyvayushcheye protyagivaniye zub'yev zubchatykh koles. [Generating broaching of gear teeth] M. Mashinostroyeniye. 211 S. [Russia].
Proizvodstvo zubchatykh koles: Spravochnik (1990) [Gear manufacturing: Handbook] /S.N.Kalashnikov, A.S.Kalashnikov, G.I.Kogan i dr .; Pod obshch. red. B.A.Tayets. M. Mashinostroyeniye. 464 S. [Russia].
Radzevich S.P. Vinokurov I.V. (1996) Optimal'noye formoobrazovaniye vintovykh poverkhnostey postoyannogo shaga diskovogo ob"yekta. [Optimal shaping of the constant pitch helical surfaces with a disk tool] / Sovremennyye problemy mashinostroyeniya i tekhnicheskiy progress. Mezhdunar. nauch.-tekhn. konf. Donetsk: DonGTU. S.191-192. [Ukraine].
Ternyuk N.E. (1983) Osnovy kompleksnoy optimizatsii sistem dlya proizvodstva zubchatykh koles. [Fundamentals of the comprehensive optimization of gear manufacturing systems] Dissertatsiya na soiskaniye uchenoy stepeni doktora tekhnicheskikh nauk. Khar'kov. 1983. 428 S. [Ukraine].
Nastasenko V.A. (1999) Development of perspective designs of worm teeth cutting tools and methods of their designing. //4th World Congress on Gearing and Power Trans-mission Paris, France: M.C.I. T1. Р. 507-514.
Nastasenko V.A. (2002) Novomu pokoleniyu chervyachnykh frez novoye pokoleniye zubofrezernykh stankov. [The new generation of worm milling cutters the new generation of gear milling machines] // Mashinostroyeniye i tekhnosfera XXI veka. Sb. trudov IKH Mezhdunar. nauch.-tekhn. konf. v g. Sevastopole. Donetsk, DonGTU, T2. –S. 164-169. [Ukraine].
Nastasenko V.A. (1994) Primeneniye sistemnykh metodov dlya povysheniya urovnya resheniy pri proyektirovanii zuboreznykh instrumentov. [The use of systemic methods to increase the decision level in the design of gear cutting tools] // Novyye tekhnologii i sistemy obrabotki v mashinostroyenii. Mezhregion. nauch.-tekhn. konf. Donetsk, DonGTU. S . 94-95. [Ukraine].
Spravochnik instrumental'shchika (1987) [Toolmaker handbook] /I.A.Ordinartsev, G.V.Filippov, A.I.Shevchenko i dr. Pod obshch. red. I.A.Ordinartseva. L. Mashinostroyeniye. 846 S. [Russia].
Nastasenko V.A. (2001) Novaya kontseptsiya povysheniya tochnosti chervyachnykh zuboreznykh instrumentov. [A new concept for improving the accuracy of worm gear cutting tools] // Progressivnyye tekhnologii i sistemy mashinostroyeniya. - Mezhdunar. sb. nauchnykh trudov.– Donetsk: DonGTU, Vyp. 17. S.109-114. [Ukraine].
Radzevich, S.P., Theory of Gearing: Kinematics, Geometry, and Synthesis, 2nd Edition, revised and expanded, CRC Press, Boca Raton, FL, 2018, 934 pages. [1st edition: Radzevich, S.P., Theory of Gearing: Kinematics, Geometry, and Synthesis, CRC Press, Boca Raton, Florida, 2012, 743 pages].
Tsepkov A.V. (1979) Profilirovaniye zatylannykh instrumentov. [Profiling of backed tools] M. Mashinostroyeniye. 150 S. [Russia].
Inozemtsev G.G. (1961) Chervyachnyye frezy s ratsional'nymi geometricheskimi i konstruktivnymi parametrami. [Worm milling cutters with rational geometric and design parameters] Saratov: Izd-vo Saratov. un-ta. 224 S. [Russia].
Rodin P.R. Metallorezhushchiye instrumenty. (1979) [Metal cutting tools] 2-ye izd., Pererab. i dop. K. Vishcha shkola. 432 S. [Ukraine].
Lashnev S.I. (1971) Formoobrazovaniye zubchatykh detaley reyechnymi i chervyachnymi instrumentami. [Geometry generation of gear parts with rack and worm tools] M. Mashinostroyeniye. 212 S. [Russia].
Kirsanov G.N. (1977) Ploskostnoy metod tochnogo profilirovaniya instrumentov dlya obrabotki vintovykh poverkhnostey. [Planar method for accurate profiling of worm type tools for machining helical surfaces] / Metallorezhushchiy i kontrol'no-izmeritel'nyy instrument. Ekspress-inform. NIImash. M. Vyp. 3. 26 S. [Russia].
Rodin P.R., Klimov V.I., Yakubson S.B. (1983) Tekhnologiya izgotovleniya zuboreznogo instrumenta. [Manufacturing technology of gear cutting tools] K. Tekhníka. 208 S. [Ukraine].
Radzevich S.P. (1989) Mnogokoordinatnoye formoobrazovaniye poverkhnostey na stankakh s CHPU. [Multi-axis surface shaping on CNC machines] // Modelirovaniye sistem, raschet elementov, formoobrazovaniye poverkhnostey, zashchitnyye pokrytiya i novoye oborudovaniye v mashinostroyenii / Ye.I.Zhukovskiy, P.P.Lizunov, A.P.Zhukovets i dr. K. Vishcha shk. S. 200-254. [Ukraine].
Al'tshuller G.S. (1973) Algoritmn izobreteniya. [Invention Algorithmus] M. Moskovskiy rabochiy. 296 S. [Russia].
Nastasenko V.A. (2003) Kompleksnaya otsenka putey povysheniya proizvoditel'nosti chervyachnykh frez. [Comprehensive assessment of ways to increase the productivity of worm milling cutters] // Mashinostroyeniye i tekhnosfera XXI veka. Sb. trudov KH Mezhdunar. nauch.-tekhn. konf. v g. Sevastopole. Donetsk, DonGTU, T3. S. 290-297. [Ukraine].
Obshchemashinostroitel'nyye normativy rezhimov rezaniya dlya tekhnicheskikh normiruyushchikh rabot na metallorezhushchikh stankakh. CH.2. Zuboreznyye, gorizontal'no-rastitel'nyye, rez'bonakatnyye i otreznyye stanki. (1974) [General engineering standards of cutting conditions for the technical regulation of works on metal-cutting machines. Part 2. Gear cutting, horizontal boring, thread rolling and cutoff machines] M. Mashinostroyeniye. 200 s. [Russia].
Spravochnik tekhnologa-mashinostroitelya (1985) [Guide book for a technologist-mechanical engineer] /V.B.Borisov, Ye.I. Borisov, V.N.Vasil'yev i dr. Pod red. A.G.Kosilovoy i R.K.Meshcheryakova. M. Mashinostroyeniye. 655 S. [Russia].
Mammano B. (1961) Perche le dentatrici a creator dovrebbero essere abbandonate //Ingeneria meccanica. T.10. №12. P. 23-39. [Italy].
Snegirev A.I. (1986) K voprosu o proizvoditel'nosti zubofrezerovaniya mnogozakhodnymi chervyachnymi frezami. [On the issue of gear milling performance with multiple-thread worm milling cutters] // Tochnost' i proizvoditel'nost' zuboobrabatyvayushchikh stankov i instrumentov. Mezhvuz. nauch. sb. Saratov: SPI. S. 3-9. [Russia].
Snegirev A.I. (1992) Analiz vozmozhnostey povysheniya proizvoditel'nosti zubofrezerovaniya uvelichivayet chislom zakhodyashchikh frezy [Analysis of the possibility of increasing the productivity of gear milling by increasing the number of milling cutter threads] // Vestnik mashinostroyeniya. №1. S.39-40. [Russia].
Nastasenko V.A. (1996) Dopolnitel'nyy analiz vozmozhnostey povysheniya proizvoditel'nosti zubofrezerovaniya uvelichivayet chislom zakhodyashchikh frezy. [Additional analysis of the possibility of increasing the productivity of gear milling by increasing the number of milling cutter threads.] / Vestnik mashinostroyeniya. №1. S.38-40. [Russia].
Mikhaylov A.N. (2009) Osnovy sinteza funktsional'no-oriyentirovannykh tekhnologiy mashinostroyeniya [Fundamentals of the synthesis of functionally oriented engineering technologies]. Donetsk: DonNTU, 2009. 346 S. [Ukraine].
Malkin A.YA. (1940) Opredeleniye proizvoditel'nykh rezhimov rezaniya pri zubonarezanii. [Determination of productive cutting conditions during gear cutting] Khar'kov. 35 S. [Ukraine].
Bobrov V.F. (1975) Osnovy teorii rezaniya metallov. [Fundamentals of the theory of metal cutting] - M. Mashinostroyeniye. 344 S. [Russia].
Nastasenko V.A. (2000) Otsenka proizvoditel'nosti odnozakhodnykh i mnogozakhodnykh chervyachnykh frez v usloviyakh povysheniya rezhushchikh svoystv. [Evaluation of the performance of single-thread and multiple-thread worm milling cutters under conditions of improving cutting properties] // Sovremennyye problemy i metodologiya proyektirovaniya i proizvodstva silovykh zubchatykh peredach: Sb. nauch. trudy. –Tula: TGU. S. 148-151. [Russia].
Polovinkin A.I. (1988) Osnovy inzhenernogo tvorchestva. [Fundamentals of engineering creativity] –M. Mashinostroyeniye. 368 S. [Russia].
Nastasenko V.A. (2000) Chervyachnyye frezy novogo vida i ikh SAPR. [Worm milling cutters of a new type and their CAD] // Vestnik mashinostroyeniya. № 8. S. 28-32. [Russia].
Patent (2003) Rossiyskoy Federatsii na izobreteniye № 2147496. MPK B23 F 21/16. Sboryaz chervyachnaya freza. [Prefabricated worm cutter] Zayavka № 98104494/02 ot 10.01.98. Avt. izobr. Nastasenko V.A. // BI 2003. № 11 ot 20.04.2000. [Russia].
Nastasenko V.A. (2001) Zubonarezaniye mnogozakhodnymi chervyachnymi frezami kak al'ternativa zuboprotyagivaniyu. [Gearing with multiple-thread worm milling cutters as an alternative to gear broaching] // STIN. №1. S. 27-31. [Russia].
Nastasenko V.A. (2015) Novyy vid tverdosplavnykh pruzhinno-plastinchatykh chervyachnykh sheverov i vozmozhnosti ikh izgotovleniya. [A new type of hard-alloy spring-plate worm shavers and the possibilities for their manufacturing] Seríya «Problemi mekhaníchnogo privodu». Kharkív, № 34 (1143) S. 103-108. [Ukraine].
Nastasenko V.A. (1997) Chervyachnyye frezy XXI veka [Worm milling cutters of the XXI century] // Progressivnyye tekhnologii mashinostroyeniya i sovremennost'. Mezhdunar. nauch.-tekhn. konf. Sevastopol'- Donetsk: DonGTU. 1997. S. 176-177. [Ukraine].
Vitrenko A.N., Vitrenko V.A., Zuy B.S., Kirichenko I.A. Povysheniye kachestva izgotovleniya zub'yev pri obrabotke mnogozakhodnym sposobom. [Improving the quality of the gear manufacturing through machining with multiple-thread tools] / Sovremennyye problemy mashinostroyeniya i tekhnicheskiy progress. Mezhdunar. nauchno-tekhn. konf. Sevastopol'-Donetsk: DonGTU, 1996. -s. 41-42. [Ukraine].
Nastasenko V.A. (2012) Osnovnyye tipy giperboloidnykh sluzhb i sposoby ikh proizvodstva [The main types of hyperboloid worms and methods for their manufacturing] // Progressivnyye tekhnologii i sistemy mashinostroyeniya: Mízhnarodniy zb. naukovikh prats'. Donets'k: DonNTU, Vip. 44. S.181–188. [Ukraine].
Patent (2016) Rossiyskoy Federatsii na izobreteniye № 2597933, MPK B 23 F 13/00. Sposob obrabotki giperboloidnykh chervyakov i chervyachnykh zuboreznykh instrumentov i ustroystva dlya ikh realizatsii [Method of processing hyperboloid worms and worm gear cutting tools and devices for their implementation] Zayavka № 2012138947/11 (063000) ot 11.09.12 Avt. izobr. Nastasenko V.A. // BI № 26 ot 20.09.2016. [Russia].
Nastasenko V.A., Podzolkov A.I. (2014) Povysheniye tekhnologichnosti izgotovleniya mnogozakhodnykh giperboloidnykh chervyachnykh instrumentov [Improving the manufacturability of multi-thread hyperboloid worm tools] // Vísnik natsíonal'nogo uníversitetu «KHPÍ». Seríya «Problemi mekhaníchnogo privodu». Kharkív,- № 31 (1074) S. 120-125. [Ukraine].
Nastasenko V.A. (2013) Analiz tochnosti i tekhnologichnosti izgotovleniya giperboloidnykh sistem s malym kolichestvom zakhodov [Analysis of the accuracy and manufacturability of hyperboloid worms with a small number of threads] // Progressivnyye tekhnologii i sistemy mashinostroyeniya: Mízhnarodniy zb. naukovikh prats'. - Donets'k: DonNTU. Vip. 46. S.171–180. [Ukraine].
Patent (2003) Rossiyskoy Federatsii na izobreteniye № 2200262. MPK V23 F 21/16. Chervyachnaya peredacha, sposob yeye izgotovleniya. [Worm gear, method of its manufacture, equipment and tools for its implementation] Zayavka № 98116838/28 ot 08.09.98. Avt. izobr. Nastasenko V.A. // BI 2003. № 7 ot 10.03.2003. [Russia].
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Nastasenko, V. (2022). Hyperboloid-Type Hobs: Design, Manufacture, and Application. In: Radzevich, S.P. (eds) Recent Advances in Gearing. Springer, Cham. https://doi.org/10.1007/978-3-030-64638-7_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-64638-7_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-64637-0
Online ISBN: 978-3-030-64638-7
eBook Packages: EngineeringEngineering (R0)