Abstract
The purpose of the work is to select materials and develop a technology for welding them with single-crystal sapphire disks at a temperature not exceeding 1200 °C and a compression pressure of not more than 14.7 MPa. The kinetics of dissimilar materials bond strengthening has been analyzed based on the data on the kinetics of micro-asperity plastic deformation forming of physical contact and fractography of welded surfaces of titanium, iron–nickel 50N alloy and synthetic single-crystal sapphire. The specificity of producing a vacuum-tight permanent connection of single-crystal sapphire with titanium and 50N alloy (for devices of electronic equipment) at temperatures not more than 1200 °C and compression pressure up to 14.7 MPa was considered.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Reshetnikov AM (1966) Technology for production of vacuum-tight ceramics to metal joints. In: Proceedings of the conference on electronic engineering, vol 1
Nikiforova ZV Rumyantseva SP, Sokolov MM (1971) Development of technology for sapphire membranes soldering in the housing made of a VT-15metal alloy. Novel materials and soldering technologies in mechanical engineering. In: Proceedings of the 5th all-union seminar on soldering, Moscow
Popov VF, Presnov VI, Kirsanova IN (1968) On reliability of vacuum-tight titanium-sapphire window connections. In: Electronic equipment, series 1: microwave electronics, vol 12
Scott William D (1967) Fabrication of bicrystals of aluminum oxide. Trans Brit Ceram Soc 66(7)
Kaynarski IS, Degtyareva EV, Boyarinova IL (1968) Diffusion welding of aluminum parts. Refractory 10
Abramov VV (1973) Kinetics of copper and nickel microasperity plastic deformation at welding in solid state under pressure with heating. Weld Prod 2
Kolmogorov GD et al (1974) Change of form and plastic deformation of copper microasperity at semiconductor devices assembly under pressure with heating. Electronic equipment, series 7: technology, organization and equipment, vol 5
Abramov VV (1975) Solid-phase connections of single crystal corundum with titanium. Weld Prod 11
Abramov VV, Karakozov ZC, Petrov VA (1970) Kinetics of the joint forming at welding in solid state by static and cyclic loading with heating. Phys Chem Mater Process 4
Kasyan MV et al (1975) On mechanization of contact interaction of sapphire tool with metals in the course of the tool finishing. Cutting of hard materials, vol 4
Redford KC, Pratt PL (1970) In: Proceedings of British Ceramic. Society, vol 15, p 185
Wiederholn SM, Hochey BJ, Roberts DE (1972) Am Ceram Soc Bull 51:335
Kvapil J (1971) Kristall und Technik, vol 6, p 1
Tabor D, Wilson JM, Bastow TI (1971) Surf Sci. 26(2):471–476
Wachtman JB, Maxwell LH J (1959) Am Ceram Soc 42:432
Kronberg ML (1962) Am Ceram Soc 45:274
Conrad HJ (1965) Am Ceram Soc 48:195
Goodman L (1962) Contact stress analysis of normally loaded spheres. Appl Mech Trans 74:515–522
Ekobory T (1971) Physics and fracture mechnics and strength of solids (trans. from English). Metallurgy, Moscow, 264p
Abramov VV, Rakunov YuP, Batishchev VV (2010) Contact mechanism sapphire tools with metals in the process of finishing treatment. Problems of stability and security of the life support system in the housing sector. Boundary, Moscow, pp 29–43
A Sealing Method for Sapphire Windows (1973) Inventor’s certificate USSR 400488, Bulletin No. 40
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Abramov, V.V., Rakunov, Y.P. (2019). Kinetics of Contact Interaction Between Dissimilar Solid Materials by Pressure Welding with Heating. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_263
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_263
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)