Abstract
This work presents the effect of selected process parameters on surface roughness in EDM machining of hot-working die steel. Different values of pulse current and pulse voltage were assumed in combination, while individual pulse time was set as constant. The effect of EDM parameters on 3D surface roughness parameters was investigated. Two samples machined with different pulse voltages were prepared, with each sample divided into five separate areas corresponding to different values of used pulse current. 3D surface roughness measurements were performed on each area of all samples. The authors have found a substantial link between pulse current and surface roughness. Moreover, it was discovered that pulse voltage affects surface roughness in a significant way for a certain range of pulse current values, allowing to obtain better surface finish with the use of a higher voltage.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kiyak, M., Cakir, O.: Examination of machining parameters on surface roughness in EDM of tool steel. J. Mater. Process. Technol. 191(1–3), 141–144 (2007)
Keskin, Y., Selcuk, H., Mevlüt, K.: An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM). Int. J. Adv. Manuf. Technol. 28(11–12), 1118–1121 (2006)
Halkaci, H.S., Abdülkadir, E.: Experimental investigation of surface roughness in electric discharge machining (EDM). In: 6th Biennial Conference (ESDA 2002), Instanbul, Turkey (2002)
Lee, S.H., Li, X.P.: Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide. J. Mater. Process. Technol. 115(3), 344–358 (2001)
Habib, S.S.: Study of the parameters in electrical discharge machining through response surface methodology approach. Appl. Math. Model. 33(12), 4397–4407 (2009)
Rahman, M.M., Khan, M.A.R., Kadirgama, K., Noor, M.M., Bakar, R.A.: Experimental investigation into electrical discharge machining of stainless steel 304. J. Appl. Sci. 11(3), 549–554 (2011)
Pellicer, N., Ciurana, J., Ozel, T.: Influence of process parameters and electrode geometry on feature micro-accuracy in electro discharge machining of tool steel. Mater. Manuf. Process. 24(12), 1282–1289 (2009)
Gostimirovic, M., Kovac, P., Skoric, B., Sekulic, M.: Effect of electrical pulse parameters on the machining performance in EDM. Indian J. Eng. Mater. Sci. 18, 411–415 (2012)
Kuruvila, N.: Parametric influence and optimization of wire EDM of hot die steel. Mach. Sci. Technol. 15(1), 47–75 (2011)
Kanlayasiri, K., Boonmung, S.: An investigation on effects of wire-EDM machining parameters on surface roughness of newly developed DC53 die steel. J. Mater. Process. Technol. 187, 26–29 (2007)
Choi, K.K., Nam, W.J., Lee, Y.S.: Effects of heat treatment on the surface of a die steel STD11 machined by W-EDM. J. Mater. Process. Technol. 201(1–3), 580–584 (2008)
Singh, S., Maheshwari, S., Pandey, P.C.: Some investigations into the electric discharge machining of hardened tool steel using different electrode materials. J. Mater. Process. Technol. 149(1–3), 272–277 (2004)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Jarosz, K., Nieslony, P., Löschner, P. (2019). Investigation of the Effect of Process Parameters on Surface Roughness in EDM Machining of ORVAR® Supreme Die Steel. In: Hloch, S., Klichová, D., Krolczyk, G., Chattopadhyaya, S., Ruppenthalová, L. (eds) Advances in Manufacturing Engineering and Materials. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-99353-9_36
Download citation
DOI: https://doi.org/10.1007/978-3-319-99353-9_36
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-99352-2
Online ISBN: 978-3-319-99353-9
eBook Packages: EngineeringEngineering (R0)