Abstract
The spindle bearing system is critical component in any machining center due to its complexity and it directly affects design or selection of components. Fail-safe design is traditional design philosophy of the machine centers which leads to over-sized machine tool design including spindle bearing system. Over-sized spindle design affects the performance characteristics of the machine center and should be optimized. Therefore, this work presents a methodology for design optimization of spindle shaft that is subjected to uniformly distributed load. The deflection distribution of shaft due to given loading condition is a way for controlling the stability of spindle and its failure. In this work analytical as well as numerical methodology is presented for modeling and validation of spindle shaft deflection. The analytical modeling of spindle uses conventional beam theory whereas numerical modeling uses finite element analysis (FEA) software ANSYS. Analytical model is validated by performing static structural analysis using BEAM188 element and used further to calculate optimum bearing spacing for minimum deflection. Finally, analytically calculated optimum bearing span is used as design variable with specific range. Thus, a goal driven optimization (GDO) is performed in ANSYS with mass reduction as an objective function and deflection as design constraint.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Reddy, V.R., Sharan, A.M.: The finite element modelled design of lathe spindles. Static Dyn. Anal. 109, 407–415 (1987)
Vadgeri, S.S., Patil, S.R., Chavan, S.T.: Static and fatigue analysis of lathe spindle for maximum cutting force. Mater. Today Proc. 5, 4438–4444 (2018). https://doi.org/10.1016/j.matpr.2017.12.012
Cao, H., Zhang, X., Chen, X.: The concept and progress of intelligent spindles: a review. Int. J. Mach. Tools Manuf. 112, 21–52 (2017). https://doi.org/10.1016/j.ijmachtools.2016.10.005
Grama, S.N., Mathur, A., Aralaguppi, R., Subramanian, T.: Optimization of high speed machine tool spindle to minimize thermal distortion. Procedia CIRP 58, 457–462 (2017). https://doi.org/10.1016/j.procir.2017.03.253
Liu, T., Gao, W., Zhang, D., Zhang, Y., Chang, W., Liang, C., Tian, Y.: Analytical modeling for thermal errors of motorized spindle unit. Int. J. Mach. Tools Manuf. 112, 53–70 (2017). https://doi.org/10.1016/j.ijmachtools.2016.09.008
Altintas, Y., Cao, Y.: Virtual design and optimization of machine tool spindles. CIRP Ann. Manuf. Technol. 54, 379–382 (2005). https://doi.org/10.1016/S0007-8506(07)60127-9
Gagnol, V., Bouzgarrou, B.C., Ray, P., Barra, C.: Stability-based spindle design, vol. 129, pp. 407–415 (2018). https://doi.org/10.1115/1.2673400
Cao, Y., Altintas, Y.: Modeling of spindle-bearing and machine tool systems for virtual simulation of milling operations. Int. J. Mach. Tools Manuf. 47, 1342–1350 (2007). https://doi.org/10.1016/j.ijmachtools.2006.08.006
Brandon, J.A.: On the quasi-static design of machine tool spindles, 204 (1990)
T.I. Central Machine, CMTI.pdf, 1st Editio, Mcgraw Higher Ed. (2001)
Joshi, P.H.: Machine Tools Handbook - Design and Operation (2007). https://doi.org/10.1036/0071494359
Maeda, O., Cao, Y., Altintas, Y.: Expert spindle design system. Int. J. Mach. Tools Manuf 45, 537–548 (2005). https://doi.org/10.1016/j.ijmachtools.2004.08.021
Canonsburg, T.D.: ANSYS Mechanical User’s Guide, 15317, pp .724–746 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Roshan, K., Chattopadhyaya, S., Bhise, S., Parle, D. (2019). Modeling and Validation of Spindle Shaft Followed by Goal Driven Optimization. In: Hloch, S., Klichová, D., Krolczyk, G., Chattopadhyaya, S., Ruppenthalová, L. (eds) Advances in Manufacturing Engineering and Materials. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-99353-9_55
Download citation
DOI: https://doi.org/10.1007/978-3-319-99353-9_55
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-99352-2
Online ISBN: 978-3-319-99353-9
eBook Packages: EngineeringEngineering (R0)