Abstract
Reinforced concrete (RC) bridge columns can be subjected to large dynamic loads during earthquakes. In order to design these structures, a thorough understanding of their nonlinear behavior is essential. 1D and 2D numerical simulation models are generally used for the analysis of these structures under axial loads and uniaxial bending. The iterative process used in the numerical simulation is cost-sensitive and time-consuming because of the complex constitute relationships of the materials. In this study, two hollow RC bridge columns tested under reversed cyclic loads at the National Centre for Research on Earthquake Engineering (NCREE) Taiwan have been analyzed using both 1D and 2D numerical simulation models. Analysis results from both simulation models such as primary backbone curves, hysteretic loops including pinching effects, and the strength degradation in the post-peak region have been compared and verified with the experimental data.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Vulcano, A., Bertero, V. V., & Colotti, V. (1988). Analytical modeling of R/C structural walls. In Proceedings of the 9th World Conference on Earthquake Engineering (Vol. 6, pp. 41–46).
Orakcal, K., Wallace, J. W., & Conte, J. P. (2004). Flexural modeling of reinforced concrete walls-model attributes. Structural Journal of the American Concrete Institute, 101(5), 688–698.
Nielsen, M. P. (1967). Om forskydningsarmering af jernbetonbjælker (On shear reinforcement in reinforced concrete beams). Bygningsstatiske Meddeleser, 38(2), 33–58 (Cophenhagan, Denmark).
Collins, M. P. (1978). Towards a rational theory for RC members in shear. Journal of the Structural Division, ASCE, 104(4), 649–666.
Mitchell, D., & Collins, M. P. (1974). Diagonal compression field theory-a rational model for structural concrete in pure torsion. Journal Proceedings of the American Concrete Institute, 71(8), 396–408.
Vecchio, F. J., & Collins, M. P. (1986). The modified compression-field theory for reinforced concrete elements subjected to shear. Journal Proceedings of the American Concrete Institute, 83(2), 219–231.
Hsu, T. T. C. (1988). Softened truss model theory for shear and torsion. Structural Journal of the American Concrete Institute, 85(6), 624–635.
Pang, X. B. D., & Hsu, T. T. C. (1996). Fixed angle softened truss model for reinforced concrete. Structural Journal of the American Concrete Institute, 93(2), 196–208.
Zhu, R. R. H. (2000). Softened membrane model of cracked reinforced concrete considering the Poisson effect (Ph.D. Dissertation). Department of Civil and Environmental Engineering, University of Houston, Houston, TX.
Mansour, M. (2001). Behaviour of reinforced concrete membrane elements under cyclic shear: Experiments to theory (Ph.D. Dissertation). Department of Civil and Environmental Engineering, University of Houston, Houston, TX.
So, M. G. (2008). Total strain based bond/slip and shear/friction membrane model for finite element analysis of reinforced concrete (Ph.D. Dissertation). Department of Mechanical, Aerospace and Structural Engineering, Washington University, Saint Louis, Missouri.
Chang, G. A., & Mander, J. B. (1994). Seismic energy based fatigue damage analysis of bridge columns: Part I-Evaluation of seismic capacity. Buffalo, NY: National Center for Earthquake Engineering Research.
Chang, Y. Y., Deng, H. Z., Lau, D. T., Ostovari, S., Tsai, K. C., & Khoo, H. A. (2004). A simplified method for nonlinear cyclic analysis of reinforced concrete structures: Direct and energy based formulations. In Proceedings of the 13th World Conference on Earthquake Engineering.
Mo, Y. L., Zhong, J., & Hsu, T. T. C. (2008). Seismic simulation of RC wall-type structures. Engineering Structures, 30(11), 3167–3175.
Zhao, Y., Jiang, H. Y., Gu, J., & Wang, R. Q. (2014). Seismic performance of reinforced concrete rectangular hollow bridge piers. Advanced Materials Research, 859, 95–99 (Trans Tech Publications).
Jia, J., Han, Q., Xu, Z., & Zhang, D. (2014). Cyclic load responses of GFRP-strengthened hollow rectangular bridge piers. Advances in Materials Science and Engineering.
Laskar, A., Mo, Y. L., & Hsu, T. T. C. (2016). Simulation of post-tensioned bridge columns under reversed-cyclic loads. Materials and Structures, 1–20.
Yeh, Y. K., Mo, Y. L., & Yang, C. Y. (2002). Full-scale tests on rectangular hollow bridge piers. Materials and Structures, 35(2), 117–125.
Tsai, W. T. (1988). Uniaxial compressional stress-strain relation of concrete. Journal of Structural Engineering, 114(9), 2133–2136.
Mander, J. B., Priestley, M. J., & Park, R. (1988). Theoretical stress-strain model for confined concrete. Journal of structural engineering, ASCE, 114(8), 1804–1826.
Mullapudi, T. R. S. (2010). Seismic analysis of reinforced concrete structures subjected to combined axial, flexure, shear and torsional loads (Ph.D. Dissertation). Department of Civil and Environmental Engineering, University of Houston, Houston, TX.
Kent, D. C., & Park, R. (1971). Flexural members with confined concrete. Journal of the Structural Division.
Menegotto, M., & Pinto, P. E. (1973). Method of analysis for cyclically loaded RC frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending. In IABSE Congress Reports of the Working Commission (Vol. 13, Issue 1).
Filippou, F. C., Popov, E. P., & Bertero, V. V. (1983). Effects of bond deterioration on hysteretic behaviour of reinforced concrete joints.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Polimeru, V.K., Sahu, A., Laskar, A. (2019). Comparative Study of 1D and 2D Simulation Models of Hollow RC Bridge Columns Under Reversed Cyclic Loads. In: Rao, A., Ramanjaneyulu, K. (eds) Recent Advances in Structural Engineering, Volume 1. Lecture Notes in Civil Engineering , vol 11. Springer, Singapore. https://doi.org/10.1007/978-981-13-0362-3_15
Download citation
DOI: https://doi.org/10.1007/978-981-13-0362-3_15
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0361-6
Online ISBN: 978-981-13-0362-3
eBook Packages: EngineeringEngineering (R0)