Abstract
In this document, a shell and tube heat exchanger (STHE) is intended, produced, and experimentally tested for distinct mass flow rates of both warm and cold fluids in a solar thermal energy conversion system (STECS). STHE’s performance is discovered by experiments conducted over 25 days at distinct combinations of heat and cold fluid mass flow rates. The studies are initially carried out to maintain the flow rate of warm fluid mass at a speed of 60 kg/h and the flow rate of cold fluid mass between 120 and 300 kg/h. Further studies with a set cold fluid flow rate of 60 kg/h are proceeded, and the warm fluid flow rate varies between 120 and 300 kg/h. The average maximum temperature of hot fluid by the use of evacuated tube solar collector (ETSC) is found to be 80 °C. Experimental results show that the STHE has a maximum effectiveness of 0.74 when the mass flow rate of warm and cold fluids is 60 and 300 kg/h, respectively. The effectiveness also averages up to 0.6508 with cold and hot fluids mass flow rates of 60 and 300 kg/h.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
de Winter F (1975) Heat exchanger penalties in double-loop solar water heating systems. Sol Energy 17(6):335–337. https://doi.org/10.1016/0038-092X(75)90034-1
Fanney AH, Klein SA (1988) Thermal performance comparisons for solar hot water systems subjected to various collector and heat exchanger flow rates. Sol Energy 40(1):1–11. https://doi.org/10.1016/0038-092X(88)90065-5
Hobbi A, Siddiqui K (2009) Experimental study on the effect of heat transfer enhancement devices in flat-plate solar collectors. Int J Heat Mass Trans 52(19–20):4650–4658. https://doi.org/10.1016/j.ijheatmasstransfer.2009.03.018
Singh S, Saini P, Kumar M (2016) Performance evaluation of parabolic solar water heater. Imperial J Interdisc Res 2(6):1–5
Marwaan A K, Mossad R (2013) Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renew Energy. 57:413–421. https://doi.org/10.1016/j.renene.2012.11.033
Abubakar GB, Egbo G (2014) Performance evaluation of flat plate solar collector (Model Te39) In Bauchi. Americal J Eng Res 3(10):34–40
Budihardjo I, Morrison GL, Behnia M (2002) Performance of a water-in-glass evacuated tube solar water heater. In: Proceedings of Solar. pp 1–6
Gao Y, Zhang Q, Fan R, Lin X, Yu Y (2009) Effects of thermal mass and flow rate on forced-circulation solar hot-water system: Comparison of water-in-glass and U-pipe evacuated-tube solar collectors. Sol Energy 98:290–301. https://doi.org/10.1016/j.solener.2013.10.014
Mahendran M, Ali TS, Shahrani A, Bakar RA (2013) The efficiency enhancement on the direct flow evacuated tube solar collector using water-based titanium oxide nanofluids. Appl Mech Mater 465–466:308–315
Mahendran M, Lee GC, Sharma KV, Shahrani A, Bakar RA (2012) Performance of evacuated tube solar collector using water-based titanium oxide nanofluid. J Mech Eng Sci 3:301–310. https://doi.org/10.15282/jmes.3.2012.6.0028
Mishra D (2015) Experimental analysis of thermal performance of evacuated U-tube solar collector. Adv Phys Lett 2(3):1–7
Sabiha MA, Saidur R, Mekhilef S (2015) An experimental study on Evacuated tube solar collector using nanofluids. Trans Sci Technol 2(1):42–49
Ghaderian J, Sidik NC (2017) An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector. Int J Heat Mass Trans 108:972–987. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.101
Mossad R, Khaffajy MA (2012) Investigating two configurations of a heat exchanger in an indirect heating integrated collector storage solar water heating system (IHICSSWHS). In: International conference on renewable energies and power quality—ICREPQ, Santiago de Compostela (Spain), 1, 1404–1409
Arslan M, Igci AA (2015) Thermal performance of a vertical solar hot water storage tank with a mantle heat exchanger depending on the discharging operation parameters. Sol Energy 116:184–204. https://doi.org/10.1016/j.solener.2015.03.045
Manilal KM (2016) Design, CFD analysis and fabrication of solar flat plate. Int Res J Eng Technol 3(1):1000–1004
Naik BK, Varshney A, Muthukumar P, Somayaji C (2016) Modelling and performance analysis of U type evacuated tube solar collector using different working fluids. In: 5th international conference on advances in energy research, ICAER, 90. pp 227–237
Caputo AC, Pelagagge PM, Salini P (2008) Heat exchanger design based on economic optimisation. Appl Thermal Eng 28(10):1151–1159. https://doi.org/10.1016/j.applthermaleng.2007.08.010
Patel VK, Rao RV (2010) Design optimisation of shell-and-tube heat exchanger using particle swarm optimisation technique. Appl Thermal Eng 30(11–12):1417–1425. https://doi.org/10.1016/j.applthermaleng.2010.03.001
Jayachandriah D, Kumar VV (2015) Design of helical baffle in shell and tube heat exchanger and comparing with segmental baffle using kern. Int J Emerg Technol Comput Sci Electron 13(2):157–162
Ambekar AS, Sivakumar R, Anantharaman N, Vivekenandan M (2016) CFD Simulation study of shell and tube heat exchangers with different baffle segment configurations. Appl Thermal Eng 108:999–1007. https://doi.org/10.1016/j.applthermaleng.2016.08.013
Vikash G (2017) Design fabrication and performance analysis of heat recovery unit in solar thermal energy conversion system used in jaggery making process. M. Tech Thesis, MNIT Jaipur, Rajasthan, India
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Gora, V., Mohan Jagadeesh Kumar, M. (2021). Design Fabrication and Testing of a Heat Exchanger in a Solar Thermal Energy Conversion System. In: Rushi Kumar, B., Sivaraj, R., Prakash, J. (eds) Advances in Fluid Dynamics. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4308-1_42
Download citation
DOI: https://doi.org/10.1007/978-981-15-4308-1_42
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4307-4
Online ISBN: 978-981-15-4308-1
eBook Packages: EngineeringEngineering (R0)