Abstract
Acoustic porous materials are extensively used in many engineering applications like building, automobile, aviation, and marine. The health risk factor and environmental claims, associated with traditional materials such as glass wool, mineral fibers, and polymer foams demand for the alternative porous acoustic absorbing materials. Advances in additive manufacturing (AM) allow to manufacture complex structures and give an alternative method to produce porous materials. This study investigates the acoustic properties of porous sound-absorbing material produced by using additive manufacturing (AM) technique and explores the feasibility of AM to manufacture acoustic absorptive materials. For study, three samples with different aperture ratios were fabricated by AM technique, and their sound absorption coefficients were measured experimentally by using the impedance tube. The theoretical formulation for predicting normal sound absorption coefficient of sample with and without air gap was developed and compared with experimental results. The predicted absorption coefficient agrees well with measured results. The measured results indicate that the absorption coefficient of the structures fabricated through AM can be altered by varying aperture ratio and air gap behind the sample. This study reinforces the capability of AM for producing complex acoustic structures with better acoustic properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bernek LL, L Vér I (2006) Noise and vibration control engineering: principles and applications. John Wiley and Sons, Inc., New York
Ingard U (2010) Noise reduction analysis (physics). Jones & Bartlett Publishers
Asdrubali F, Schiavoni S, Horoshenkov KV (2012) A review of sustainable materials for acoustic applications. Build Acoust 19(4):283–312
Joshi SV, Drzal LT, Mohanty AK, Arora S (2004) Are natural fiber composites environmentally superior to glass fiber reinforced composites? Compos Part A: Appl Sci Manuf 35(3):371–376
Zulkifli R, Mohd Nor MJ, Mat Tahir MF, Ismail AR, Nuawi MZ (2008) Acoustic properties of multi-layer coir fibres sound absorption panel. J Appl Sci 8(20):3709–3714
Ersoy Sezgin, Küçük Haluk (2009) Investigation of industrial tea-leaf-fibre waste material for its sound absorption properties. Appl Acoust 70(1):215–220
Fatima S, Mohanty AR (2011) Acoustical and fire-retardant properties of jute composite materials. Appl Acoust 72(2–3):108–114
Ian G, David R, Brent S (2014) Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing. Springer, New York
Liu Z, Zhan J, Fard M, Davy JL (2016) Acoustic properties of a porous polycarbonate material produced by additive manufacturing. Mater Lett 181:296–299
Setaki F, Van Timmeren A, Turrin M (2016) New sound absorption materials: using additive manufacturing for compact size, broadband sound absorption at low frequencies. In: INTER-NOISE and NOISE-CON congress and conference proceedings, vol. 253, pp. 6190–6195. Institute of Noise Control Engineering
Liu Z, Zhan J, Fard M, Davy JL (2017) Acoustic measurement of a 3D printed micro-perforated panel combined with a porous material. Meas J Int Meas Confed 104:233–236
Akiwate DC, Date MD, Venkatesham B, Suryakumar S (2018) Acoustic properties of additive manufactured narrow tube periodic structures. Appl Acoust 136:123–131
Munjal ML (2014) Acoustics of ducts and mufflers, 2nd edn. Wiley, Chichester
Impedance tube test system ver. 1.03 Users manual, BSWA Tech. Co. Ltd, Beijing, P.R China (2010)
ASTM (2008) E1050-08 standard test method for impedance and absorption of acoustical materials using a tube, two microphones and a digital frequency analysis system. ASTM International, West Conshohocken, PA
Jean A, Noureddine A (2009) Propagation of sound in porous media: modelling sound absorbing materials 2e. Wiley, New York
Liu Z, Zhan J, Fard M, Davy JL (2017) Acoustic properties of multilayer sound absorbers with a 3D printed micro-perforated panel. Appl Acoust 121:25–32
Acknowledgments
Deepak Akiwate is a recipient of Prime Minister’s Fellowship Scheme for Doctoral Research, a public-private partnership between Science and Engineering Research Board (SERB), Department of Science and Technology, Government of India and Confederation of Indian Industry (CII). The authors host institute for research is IIT Hyderabad and the partner company is Eaton Technologies Private Limited, Pune.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Akiwate, D.C., Date, M.D., Venkatesham, B., Suryakumar, S. (2021). Acoustic Properties of Additive Manufactured Porous Material. In: Singh, M., Rafat, Y. (eds) Recent Developments in Acoustics. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-5776-7_12
Download citation
DOI: https://doi.org/10.1007/978-981-15-5776-7_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5775-0
Online ISBN: 978-981-15-5776-7
eBook Packages: EngineeringEngineering (R0)