Regulation of Zn on mechanical properties and sensitization behavior of 5083 alloy
Authors (first, second and last of 8)
Collection
Metals & corrosion
Articles under the subject areas of Metals and Corrosion
Articles (701 in this collection)
-
-
-
Investigation of hot deformation behavior of forged 42CrMoA steel by cellular automata method based on topological deformation technique
Authors (first, second and last of 5)
-
Interfacial characteristics and wear properties of laser fabricated Fe‒Al coatings on 6061 aluminum alloy
Authors (first, second and last of 6)
-
Semisolid tensile properties near solidus temperature of direct-chill-cast AA5182 alloy and its hot-tearing susceptibility
Authors (first, second and last of 5)
-
Alloying effects on the microstructure and properties of CoCrFeMnNiX0.1 high-entropy alloys via rolling and thermal treatment
Authors (first, second and last of 6)
-
Tensile properties and fracture behavior of Al–8Si alloy sheets with different Mg under natural aging
Authors (first, second and last of 4)
-
Synergic effects of scanning pattern and heat treatment on the microstructure-hot tensile behavior relationships of powder bed fusion-laser beam manufactured Hastelloy X
Authors (first, second and last of 6)
-
Evolution of microstructure and properties in reactive air brazing of 3YSZ ceramic and aluminized Crofer22h stainless steel using Pd-modified Ag–CuO filler
Authors (first, second and last of 7)
-
Vacuum sealing-assisted processing of titanium–zirconium alloys: synthesis, microstructure, hardness, friction, wear, and corrosion studies for biomedical application
Authors (first, second and last of 4)
-
Study on the influence of surface nickel plating on the microstructure and mechanical properties of WC-8Co/Inconel 718 brazed joints
Authors (first, second and last of 6)
-
Unveiling the microstructure evolution and mechanical properties in a gas tungsten arc-welded Fe–Mn–Si–Cr–Ni shape memory alloy
Authors (first, second and last of 10)
-
Mechanical response, deformation and damage mechanisms in dual-phase cobalt upon plate impact
Authors (first, second and last of 9)
-
Acoustic shock wave-induced reversible phase transition (rhombohedral to hexagonal) of bismuth telluride
Authors (first, second and last of 6)
-
Mechanical, tribological, corrosion and tribocorrosion properties of ZrNxOy coatings on Ti–45Nb alloys by multi-arc ion plating
Authors (first, second and last of 7)
-
The effect of laser shock peening on the rotating bending fatigue resistance of S51740 stainless steel
Authors (first, second and last of 9)
-
Effect of calcium carbonate whiskers on the setting behavior, autogenous shrinkage, drying shrinkage, and micro-structure of cement paste
Authors (first, second and last of 4)
-
Effect of grain orientation on the corrosion behavior of AZ31 alloy sheet
Authors (first, second and last of 6)
-
Transformation microstructure and nucleation crystallography in high Sc-contained Al–Sc alloys after laser treatment
Authors (first, second and last of 7)
-
Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT
Authors (first, second and last of 5)
-
Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder
Authors (first, second and last of 12)
-
Wear resistance of Ni/nano-Al2O3 composite coatings by brush electroplating
Authors (first, second and last of 6)
-
Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy
Authors (first, second and last of 8)
-
Effect of overlap rate on the microstructure and corrosion behavior of pure copper laser cladding
Authors
-
-
Effect of deep cryogenic treatment on microstructures and mechanical properties of automotive 6063Al alloy
Authors (first, second and last of 8)
-
-
Strain-induced solid-state coating of TWIP steel sheets with zinc
Authors (first, second and last of 6)
-
A comparative study of macrosegregation evolution kinetics for undercooled Cu60Fe40 immiscible alloy during slow cooling and rapid cooling processes
Authors (first, second and last of 6)
-
Impact of swaps on Mössbauer characteristics of Ni2MnSn: an experimental and quantum-mechanical study
Authors (first, second and last of 6)
-
Improved laser-induced dynamic wetting behavior and spreading mechanism of non-reactive Mg/steel systems with the assistance of Cu coating
Authors (first, second and last of 10)
-
Non-destructive characterization of dislocation density in annealed pure iron using nonlinear ultrasonic combined with recurrence quantification analysis
Authors (first, second and last of 4)
-
Interrupted tensile tests to reveal the non-uniform tensile deformation of AZ31 magnesium alloy welding joint processed by friction stir welding
Authors (first, second and last of 7)
-
Study of the damage mechanism on mechanical properties of super absorbent polymer-improved geopolymers under dry–wet cycling
Authors (first, second and last of 5)
-
Effect of Si alloying on the structural, thermal expansion, and magnetic properties of FeCoNiAlSix high-entropy alloys
Authors (first, second and last of 5)
-
Preparation and characterization of Ni–SiO2 composite coating on pipeline inner surface
Authors (first, second and last of 7)
-
Controlling CuCrZr alloy properties and microstructure rapidly by pulsed electric treatment (PET)
Authors (first, second and last of 9)
-
Effect of twist-channel angular pressing on precipitation in Al–Mg–Zn–Ga alloys
Authors (first, second and last of 7)
-
Bio-templated synthesis of MnO2-based micromotors for enhanced heavy metal removal from aqueous solutions
Authors (first, second and last of 6)
-
Influence of HVOF spraying parameters on microstructure and mechanical properties of FeCrMnCoNi high-entropy coatings (HECs)
Authors (first, second and last of 10)
-
Effect of α phase morphologies on shear localization behavior of TC4 titanium alloy at high strain rate
Authors (first, second and last of 8)
-
-
Microstructure and tribocorrosion properties of Fe-based amorphous composite coatings fabricated by laser cladding
Authors (first, second and last of 6)
-
Additive manufacturing of Fe-3.5 wt.-%Si electrical steel via laser powder bed fusion and subsequent thermomechanical processing
Authors (first, second and last of 4)
-
In situ tip-guided growth of nickel nanostructures through the application of electric current
Authors
-
Uncovering the generic and alloy-specific governing parameters of deformation-induced martensitic transformation in austenitic steel
Authors (first, second and last of 5)
-
-
Study of the crack propagation characteristics of brittle materials at low temperatures based on 3D-ILC
Authors (first, second and last of 5)
-
Ecofriendly β-N-butyl amino propionic acid as green corrosion inhibitor for N80 steel in CO2-saturated brine water
Authors (first, second and last of 6)
-
