1. Zirconia-toughened alumina (ZTA) ceramics

   • J. Wang
   • R. Stevens

   Review Pages: 3421 - 3440

2. The orientation of the Hertzian cone crack in soda-lime glass formed by oblique dynamic and quasi-static loading with a hard sphere

   • M. Munawar Chaudhri
   • Chen Liangyi

   Review Pages: 3441 - 3448

3. Combustion synthesis of TiNi intermetallic compounds

   • H. C. Yi
   • J. J. Moore

   Review Pages: 3449 - 3455

4. Combustion synthesis of TiNi intermetallic compounds

   • H. C. Yi
   • J. J. Moore

   Review Pages: 3456 - 3462

5. Metallographic observations during the sintering of BM2 type of high speed steels

   • P. Maulik

   Review Pages: 3463 - 3468

6. Dielectric properties of SrTiO₃ single crystals subjected to high electric fields and later irradiated with X-rays orγ-rays

   • B. K. Choudhury
   • K. V. Rao
   • R. N. P. Choudhury

   Review Pages: 3469 - 3474

7. Polymerization of hexa(phenoxy) cyclotriphosphazene with Friedel-Crafts type catalysts

   • Meisetsu Kajiwara

   Review Pages: 3475 - 3477

8. The effect of aluminium on the electrical and mechanical properties of BaTiO₃ ceramics as a function of sintering temperature

   • T. V. Parry
   • H. M. Al-Allak
   • J. Woods

   Review Pages: 3478 - 3482

9. Analyses of the mechanical properties and microstructure of bamboo-epoxy composites

   • F. G. Shin
   • X. -J. Xian
   • M. W. Yipp

   Review Pages: 3483 - 3490

10. Tensile and tear failure of plasticized poly (vinyl chloride)/epoxidized natural rubber miscible blends

    • K. T. Varughese
    • G. B. Nando
    • S. K. Sanyal

    Review Pages: 3491 - 3496

11. High temperature studies of Fe-Mn-Al-C alloys with different manganese concentrations in air and nitrogen

    • W. S. Yang
    • C. M. Wan

    Review Pages: 3497 - 3503

12. On the estimation of the tensile strength of carbon fibres at short lengths

    • M. El Asloun
    • J. B. Donnet
    • J. Schultz

    Review Pages: 3504 - 3510

13. Failure processes within ceramic coatings at high temperatures

    • Christopher C. Berndt

    Review Pages: 3511 - 3520

14. Layer removal analysis of residual stress

    • M. W. A. Paterson
    • J. R. White

    Review Pages: 3521 - 3528

15. Mechanical properties and strain-induced phase transformations of some high-strength manganese steels

    • A. O. Inegbenebor
    • R. D. Jones
    • Brian Ralph

    Review Pages: 3529 - 3535

16. Tensile strength of fibre-reinforced metal matrix composites with non-uniform fibre spacing

    • Shojiro Ochiai
    • Kozo Osamura

    Review Pages: 3536 - 3540

17. Stress relaxation in wood (Scots pine veneer)

    • D. G. Kubat
    • S. Samuelsson
    • C. Klason

    Review Pages: 3541 - 3548

18. Chemical vapour deposition of epitaxial Ni-Zn ferrite films by thermal decomposition of acetylacetonato complexes

    • Hideaki Itoh
    • Toshiya Uemura
    • Shigeharu Naka

    Review Pages: 3549 - 3552

19. Direct production of ultra-fine nitrides (Si₃N₄ and AIN) and carbides (SiC, WC and TiC) powders by the arc plasma method

    • K. Ishizaki
    • T. Egashira
    • P. B. Celis

    Review Pages: 3553 - 3559

20. Direct and alternating electrical conduction in copper phosphate glasses containing praseodymium and calcium

    • A. E. Mohamed-Osman
    • M. A. Hassan
    • C. A. Hogarth

    Review Pages: 3560 - 3564

21. Synthesis and characterization of gel-derived barium hexa-aluminate

    • J. C. Debsikdar

    Review Pages: 3565 - 3572

22. Crystalline plate-like SiO₂ precipitates in silicon and their relation with new donors

    • Z. G. Xiao
    • X. W. Lin
    • L. C. Qin

    Review Pages: 3573 - 3576

23. Structures and chemistry of tungsten powder from doped and undoped tungsten blue oxide

    • J. L. Walter
    • K. A. Lou

    Review Pages: 3577 - 3587

24. The optical birefringence of injection-moulded polystyrene and polyethylene

    • B. L. Evans

    Review Pages: 3588 - 3598

25. New types of hydrous titanium oxides obtained by homogeneous precipitation from (titanium (III) chloride + urea) solutions

    • Akira Ookubo
    • Kenta Ooi
    • Teizaburo Tomita

    Review Pages: 3599 - 3604

26. Casting particulate and fibrous metal-matrix composites by vacuum infiltration of a liquid metal under an inert gas pressure

    • Jingyu Yang
    • D. D. L. Chung

    Review Pages: 3605 - 3612

27. Physical ageing of polypropylene in glassy state

    • B. Min
    • K. D. Pae

    Review Pages: 3613 - 3615

28. Fatigue behaviour characterization of the fibre-matrix interface

    • R. A. Latour Jr
    • J. Black
    • B. Miller

    Review Pages: 3616 - 3620

29. A morphological investigation of electrodes for solid electrolytes

    • J. D. Canaday
    • T. A. Wheat
    • I. H. Joyce

    Review Pages: 3621 - 3634

30. Similarities in the fracture surface features of borosilicate and polymer glasses

    • Tsung-Yu Pan
    • Richard E. Robertson
    • Frank E. Filisko

    Review Pages: 3635 - 3642

31. Rotary powder bed chemical vapour deposition of titanium nitride on spherical iron powder

    • Hideaki Itoh
    • Kenji Hattori
    • Shigeharu Naka

    Review Pages: 3643 - 3646

32. Structure observations by high-resolution electron microscopy of Ni-B melt-spun alloys (B<30 at%)

    • J. Ajao
    • S. Hamar-Thibault
    • J. Thibault-Desseaux

    Review Pages: 3647 - 3659

33. Elastic constants of the iron oxide doped yttria-stabilized zirconia

    • M. A. Ewaida
    • A. A. Higazy
    • M. M. Abou Sekkina

    Review Pages: 3660 - 3666

34. A study on dental nonprecious cast alloys

    • B. I. Sosrosoedirdjo
    • K. Wakasa
    • M. Yamaki

    Review Pages: 3667 - 3672

35. The optical absorption edge in amorphous thin films of MoO₃-In₂O₃

    • M. Anwar
    • C. A. Hogarth

    Review Pages: 3673 - 3678

36. Preparation of SiC hollow particles by gas-phase reaction in the SiH₄-CH₄-H₂ system

    • C. H. Pai
    • K. Koumoto
    • H. Yanagida

    Review Pages: 3679 - 3685

37. Detection of physical flaws in alumina reinforced with SiC fibres by NMR imaging in the green state

    • S. Karunanithy
    • S. Mooibroek

    Review Pages: 3686 - 3690

38. Kinetic-thermal processes of hydrogen sorption on Pd/WO₃ and Pd/MoO₃ bronze

    • Milenko V. Šušić
    • Yuriy M. Solonin

    Review Pages: 3691 - 3698

39. Mechanical sputtering of structural stainless steels

    • T. Nenadović
    • N. Popovic
    • J. Fine

    Review Pages: 3699 - 3706

40. High temperature oxidation of Ni₂AlTi

    • C. C. Lee
    • P. Shen

    Review Pages: 3707 - 3711

41. Sintering ofβ-sialon with 5mol% Y₂O₃-ZrO₂ additives

    • Shin-Ichi Hirano
    • Takashi Hayashi
    • Takayo Nakashima

    Review Pages: 3712 - 3716

42. Crystallization and precipitation structures of quasicrystalline phase in rapidly solidified Al-Mn-X ternary alloys

    • T. Ohashi
    • N. Fukatsu
    • K. Asai

    Review Pages: 3717 - 3724

43. Fracture toughness of acrylic bone cements

    • C. T. Wang
    • R. M. Pilliar

    Review Pages: 3725 - 3738

44. Synthesis of chemically coprecipitated hexagonal strontium-ferrite and its characterization

    • Shailaja Kulkarni
    • Jyotsna Shrotri
    • S. K. Date

    Review Pages: 3739 - 3744

45. Double tetrametaphosphates Mn_2−x Mg _x P₄O₁₂

    • M. Trojan
    • L. Beneš

    Review Pages: 3745 - 3749

46. Effect of doping with chromium on the physicochemical properties of ironmolybdenum oxide systems

    • M. Del Arco
    • C. Martin
    • A. F. Tena

    Review Pages: 3750 - 3755

47. Reinforcement and antioxidizing of porous carbon by pulse CVI of SiC

    • Konzo Sugiyama
    • Eiji Yamamoto

    Review Pages: 3756 - 3762

48. The adhesion behaviour of high modulus polyethylene fibres following plasma and chemical treatment

    • N. H. Ladizesky
    • I. M. Ward

    Review Pages: 3763 - 3773

49. SEM study of pyrophyllite high-temperature transformations

    • Pedro J. Sanchez-Soto
    • Jose L. Perez-Rodriguez

    Review Pages: 3774 - 3778

50. Precipitation in liquid-quenched Al-Mg alloys; a study using X-ray diffraction line shift and line broadening

    • P. van Mourik
    • N. M. Maaswinkel
    • E. J. Mittemeijer

    Review Pages: 3779 - 3786