1. Continuous fiber reinforced mullite matrix composites by sol–gel processing: Part II Properties and fracture behaviour

   • J Wu
   • F. R Jones
   • P. F James

   OriginalPaper Pages: 3629 - 3635

2. Effect of electron-beam irradiation on water wettability of hydroxy apatites for artificial bone

   • Y Nishi
   • H Izumi
   • M Ochi

   OriginalPaper Pages: 3637 - 3639

3. Fatigue fracture mechanisms and fractography of short-glassfibre-reinforced polyamide 6

   • J. J Horst
   • J. L Spoormaker

   OriginalPaper Pages: 3641 - 3651

4. Preparation of the Bi8Sb32Te60 solid solution by mechanical alloying

   • P Pierrat
   • A Dauscher
   • H Scherrer

   OriginalPaper Pages: 3653 - 3657

5. Preparation and properties of barium titanate glass-ceramics sintered from sol–gel-derived powders

   • KUI Yao
   • Liangying Zhang
   • Weiguang Zhu

   OriginalPaper Pages: 3659 - 3665

6. Growth crystallography of Bi12SiO20 single crystals solidified by a floating zone method

   • Senlin Fu
   • Hiroyuki Ozoe

   OriginalPaper Pages: 3667 - 3674

7. Deformation of spherulitic polyethylene thin films

   • M. F Butler
   • A. M Donald

   OriginalPaper Pages: 3675 - 3685

8. Long term coarsening of γ′ precipitates in a Ni-base superalloy

   • A Ges
   • O Fornaro
   • H Palacio

   OriginalPaper Pages: 3687 - 3691

9. Corrosion inhibition of Al–bronze in acidified 4% NaCl solution

   • A. A El-Warraky
   • H. A El-Dahan

   OriginalPaper Pages: 3693 - 3700

10. HgO as an internal oxygen source in Y1Ba2Cu3O7-δ

    • A Pandey
    • Y. S Reddy
    • R. G Sharma

    OriginalPaper Pages: 3701 - 3703

11. Electrical and morphological characterization of a nickel–polyester composite prepared by spreading and spraying techniques

    • M. M Davila
    • M. P Elizalde
    • R Silva

    OriginalPaper Pages: 3705 - 3710

12. Evaluation of the statistical parameters of a Weibull distribution

    • M. R Gurvich
    • A. T Dibenedetto
    • A Pegoretti

    OriginalPaper Pages: 3711 - 3716

13. Effect of 1,3-bis(citraconimidomethyl) benzene on the aerobic and anaerobic ageing of diene rubber vulcanizates

    • N. R Kumar
    • A. K Chandra
    • R Mukhopadhyay

    OriginalPaper Pages: 3717 - 3725

14. Effect of silicon ion implantation on the properties of a cast Co–Cr–Mo alloy

    • M Kaminski
    • J Baszkiewicz
    • J Jagielski

    OriginalPaper Pages: 3727 - 3732

15. Dislocations studies in β-silicon nitride

    • X Milhet
    • H Garem
    • T Rouxel

    OriginalPaper Pages: 3733 - 3738

16. The kinetics of decomposition of solid solutions

    • V. V Slezov
    • YA. J Tkatch
    • J Schmelzer

    OriginalPaper Pages: 3739 - 3747

17. Composition dependence of discontinuousmagnetization in CuxFe3-xO4+δ

    • A. H Wafik
    • A. M Abd-El-Rahman
    • S. A Mazen

    OriginalPaper Pages: 3749 - 3752

18. Processing, sintering characteristics and dielectric properties of barium-substituted Pb(Mg1/3Nb2/3)O3–PbTiO3 solid solution

    • J. P Guha
    • G. H Haertling

    OriginalPaper Pages: 3753 - 3758

19. Microstructural investigation of Bi–Sr–Ca–Cu–oxide thick films on alumina substrates

    • J. A Alarco
    • A Ilushechkin
    • I. D. R Mackinnon

    OriginalPaper Pages: 3759 - 3764

20. Crystal growth of selected II–VI semiconducting alloys by directional solidification: Part I Ground-based experiments

    • CHING-HUA Su
    • YI-GAO Sha
    • R. N Scripa

    OriginalPaper Pages: 3765 - 3768

21. Determination of the parent grain orientation and habit plane normals for β′1 martensite in a Cu–Al–Ni–Mn shape memory alloy

    • L Chen
    • D. P Dunne
    • N. F Kennon

    OriginalPaper Pages: 3769 - 3773

22. Mechanism of film growth during anodizing of Al-alloy-8090/SiC metal matrix composite in sulphuric acid electrolyte

    • M Shahid

    OriginalPaper Pages: 3775 - 3781

23. Dielectric relaxations in liquid-impregnated porous solids

    • B Nettelblad
    • G. A Niklasson

    OriginalPaper Pages: 3783 - 3800

24. Excimer laser processing of chemical vapour-deposited diamond fibres

    • G Meaden
    • P. G Partridge
    • M. N. R Ashfold

    OriginalPaper Pages: 3801 - 3806

25. Processing of spodumene-modified mullite ceramics

    • I. M Low
    • E Mathews
    • X. M Pillai

    OriginalPaper Pages: 3807 - 3812

26. Anisotropy of creep deformation rate in hot-pressed Si3N4 with preferred orientation of the elongated grains

    • S. Y Yoon
    • T Akatsu
    • E Yasuda

    OriginalPaper Pages: 3813 - 3819

27. Solidification microstructure of super-α2 alloy prepared by gas atomization

    • R Xu
    • Y. Y Cui
    • Z. Q Hu

    OriginalPaper Pages: 3821 - 3827

28. Aluminium nitride–molybdenum ceramic matrix composites: influence of molybdenum concentration on the mechanical properties

    • A. A Khan
    • J. C Labbe

    OriginalPaper Pages: 3829 - 3833

29. Solid-state reaction in nanocrystalline Fe/SiC composites prepared by mechanical alloying

    • T. D Shen
    • C. C Koch
    • J. T Wang

    OriginalPaper Pages: 3835 - 3839

30. Residual stress and thermal properties of zirconia/metal (nickel, stainless steel 304) functionally graded materials fabricated by hot pressing

    • Yeon-Gil Jung
    • Sung-Churl Choi
    • Un-Gyu Paik

    OriginalPaper Pages: 3841 - 3850

31. Delamination study using four-point bending of bilayers

    • J Zhang
    • J. J Lewandowski

    OriginalPaper Pages: 3851 - 3856

32. Relaxation time for ionized impurity scattering in compensated n-type Hg1-xCdxTe near x=0.2

    • P Girault
    • C Blanchard
    • J. F Barbot

    OriginalPaper Pages: 3857 - 3861

33. Synthesis and characterization of lanthanum phosphate sol for fibre coating

    • Peng Chen
    • Tai-Il Mah

    OriginalPaper Pages: 3863 - 3867

34. Characterization of molybdenum black coatings on zinc substrates

    • F Jahan
    • B. E Smith

    OriginalPaper Pages: 3869 - 3874

35. A conduction calorimetric study of early hydration of ordinary Portland cement/high alumina cement pastes

    • Ping Gu
    • J. J Beaudoin

    OriginalPaper Pages: 3875 - 3881

36. The mechanical properties of friction welded aluminium-based metal–matrix composite materials

    • Y Zhou
    • J Zhang
    • Z Wang

    OriginalPaper Pages: 3883 - 3889

37. Mechanical properties and microstructural stability of wrought, laser, and electron beam glazed NARloy-Z alloy at elevated temperatures

    • J Singh
    • G Jerman
    • A. K Kuruvilla

    OriginalPaper Pages: 3891 - 3903