1. In situ ESEM study of the deformation of elementary flax fibres

   • H. L. Bos
   • A. M. Donald

   OriginalPaper Pages: 3029 - 3034

2. Reaction characteristics of La0.84Sr0.16CrO3 formation

   • A. L. Wagner
   • A. J. Jacobson
   • D. Luss

   OriginalPaper Pages: 3035 - 3041

3. High temperature oxidation behavior of CaB6 sintered body

   • J. Matsushita
   • S. Komarneni

   OriginalPaper Pages: 3043 - 3046

4. Heat treatment investigations on the laser synthesized amorphous Si/C/N nanocomposite powders

   • Z. W. Pan
   • S. S. Xie
   • L. T. Zhang

   OriginalPaper Pages: 3047 - 3052

5. Lead phthalocyanine incorporated in sol and gel

   • Haiping Xia
   • Masayuki Nogami

   OriginalPaper Pages: 3053 - 3055

6. Effect of Na-diffusion on the electrical properties of SrTiO3

   • Seong-Ho Kim
   • Jae-Dong Byun
   • Yoonho Kim

   OriginalPaper Pages: 3057 - 3061

7. Transcrystallization with reorientation in drawn PET/PA12 blend as revealed by WAXS from synchrotron radiation

   • D. Sapoundjieva
   • Z. Denchev
   • M. Stamm

   OriginalPaper Pages: 3063 - 3066

8. FTIRS study of porous silicon at different oxidation stages

   • J. D. Moreno
   • R. Guerrero-Lemus
   • J. González-Velasco

   OriginalPaper Pages: 3067 - 3069

9. Low-loss dielectrics

   • A. K. Jonscher

   OriginalPaper Pages: 3071 - 3082

10. Formation studies of TiC from carbon coated TiO2

    • G. A. Swift
    • R. Koc

    OriginalPaper Pages: 3083 - 3093

11. Synthesis of ZSM-5 zeolite composite membranes for CO2 separation

    • S. H. Hyun
    • J. K. Song
    • S. A. Hong

    OriginalPaper Pages: 3095 - 3105

12. Pore structure and swelling character of porous carbon beads prepared from esterified silica gels

    • K. Kamegawa
    • H. Yoshida

    OriginalPaper Pages: 3105 - 3108

13. Sol-gel preparation and thermal stability of Pd/γ-Al2O3 catalysts

    • C.K. Lambert
    • R. D. Gonzalez

    OriginalPaper Pages: 3109 - 3116

14. Crystalline β-C3N4 synthesized by MPCVD

    • Y. S. Gu
    • Y. P. Zhang
    • L. Yuan

    OriginalPaper Pages: 3117 - 3125

15. Sol-gel/co-precipitation method for the preparation and characterization of zirconia-tungsten composite powders

    • S. Vives
    • C. Guizard
    • C. Oberlin

    OriginalPaper Pages: 3127 - 3135

16. The corrosion of tantalum in oxidizing sub- and supercritical aqueous solutions of HCl, H2SO4 and H3PO4

    • C. Friedrich
    • P. Kritzer
    • E. Dinjus

    OriginalPaper Pages: 3137 - 3141

17. A novel way of estimation of the apparent activation energy of cement hydration using microwave technique

    • X. Zhang
    • Y. Yang
    • C. K. Ong

    OriginalPaper Pages: 3143 - 3147

18. X-ray diffraction analysis of 10,12-pentacosadiynoic acid Langmuir-Blodgett films during polymerization

    • Yu Shufang
    • Zhou Huilin
    • He Pingsheng

    OriginalPaper Pages: 3149 - 3154

19. Brittle-to-ductile transition temperature and its strain rate sensitivity in a two-phase titanium aluminide with near lamellar microstructure

    • Yu Wang
    • Dongliang Lin
    • Chi C. Law

    OriginalPaper Pages: 3155 - 3159

20. Morphologies and release behavior of polyurea microcapsules from different polyisocyanates

    • K. Hong
    • S. Park

    OriginalPaper Pages: 3161 - 3164

21. Effect of gas evolution at solid-liquid interface on contact angle between liquid Si and SiO2

    • H. Fujii
    • M. Yamamoto
    • K. Nogi

    OriginalPaper Pages: 3165 - 3168

22. High-frequency dielectric behaviour of polycrystalline zinc substituted cobalt ferrites

    • A. V. Ramana Reddy
    • G. Ranga Mohan
    • B. S. Boyanov

    OriginalPaper Pages: 3169 - 3176

23. The critical time in temper embrittlement isotherms of phosphorus in steels

    • Xu Tingdong

    OriginalPaper Pages: 3177 - 3180

24. The analysis of 2 × 2 factorial fracture experiments with brittle materials

    • J. I. McCool
    • G. Baran

    OriginalPaper Pages: 3181 - 3188

25. Influence of the preparation conditions on the synthesis of high surface area SiC for use as a heterogeneous catalyst support

    • N. Keller
    • C. Pham-Huu
    • J. Guille

    OriginalPaper Pages: 3189 - 3202

26. Characterization of single and discretely-stepped electro-composite coatings of nickel-alumina

    • S. W. Banovic
    • K. Barmak
    • A. R. Marder

    OriginalPaper Pages: 3203 - 3211

27. Preparation of nanostructured tin oxide using a sol-gel process based on tin tetrachloride and ethylene glycol

    • G. Zhang
    • M. Liu

    OriginalPaper Pages: 3213 - 3219

28. Natural rubber/epoxidised natural rubber-25 blends: morphology, transport phenomena and mechanical properties

    • T. Johnson
    • Sabu Thomas

    OriginalPaper Pages: 3221 - 3239

29. Infrared spectra of bismuth family of superconductors Bi2Sr2Can−1CunO4+2n+y

    • S. Mohan
    • R. Kannan

    OriginalPaper Pages: 3241 - 3247

30. Processing parameter effects on the reaction bonding of aluminum oxide process*

    • E. Suvaci
    • G. L. Messing

    OriginalPaper Pages: 3249 - 3261

31. Fatigue-life prediction of SiC particulate reinforced aluminum alloy 6061 matrix composite using AE stress delay concept

    • D. Shan
    • H. Nayeb-Hashemi

    OriginalPaper Pages: 3263 - 3273

32. Thermal behavior of α-Ba(FeS2)2 and AgFeS2: quasi-unidimensional and 3D network compounds prepared from ion-exchange on the same precursor

    • A. Galembeck
    • O. L. Alves

    OriginalPaper Pages: 3275 - 3280

33. Defect formation during binder removal in ethylene vinyl acetate filled system

    • K. E. Hrdina
    • J. W. Halloran
    • A. Oliveira

    OriginalPaper Pages: 3281 - 3290

34. Mechanism and reversible behavior of the α′ → γ transformation in 1Cr18Ni9Ti stainless steel

    • Y. Zhang
    • X. T. Jing
    • F. Z. Cui

    OriginalPaper Pages: 3291 - 3296