1. Effect of temperature on thermo-mechanical properties of Macro-Defect-Freecement-polymer composite

   • R. Alfani
   • P. Colombet
   • L. Nicolais

   OriginalPaper Pages: 5683 - 5687

2. Infrared spectroscopic evaluation of the photodegradation of paint Part I The UV degradation of acrylic films pigmented with titanium dioxide

   • P. A. Christensen
   • A. Dilks
   • J. Temperley

   OriginalPaper Pages: 5689 - 5700

3. Fabrication of transparent continuous oxynitride glass fiber-reinforced glass matrix composite

   • H. Iba
   • T. Naganuma
   • Y. Kagawa

   OriginalPaper Pages: 5701 - 5705

4. Simulation of prismatic cracking of cooling basalt lava flows by the drying of sol-gels

   • D. Hull
   • B. D. Caddock

   OriginalPaper Pages: 5707 - 5720

5. Sintering mechanisms in strontium doped lanthanum chromite

   • S. Simner
   • J. Hardy
   • T. Armstrong

   OriginalPaper Pages: 5721 - 5732

6. A technique for the fabrication of fully dense Ca-rich plagioclase (An70-An100) samples suitable for studying the plastic rheology of bytownite (An80)

   • A. S. Wendt
   • D. L. Olgaard
   • D. Mainprice

   OriginalPaper Pages: 5733 - 5742

7. In-situ high temperature X-ray diffraction study of Co/SiC interface reactions

   • T. Fujimura
   • S.-I. Tanaka

   OriginalPaper Pages: 5743 - 5747

8. Dynamic strains in architectural laminated glass subjected to low velocity impacts from small projectiles

   • R. A. Behr
   • P. A. Kremer
   • N. D. Kaiser

   OriginalPaper Pages: 5749 - 5756

9. The displacive compensation of porosity (DCP) method for fabricating dense, shaped, high-ceramic-bearing bodies at modest temperatures

   • P. Kumar
   • K. H. Sandhage

   OriginalPaper Pages: 5757 - 5769

10. Effects of particle size on thermal durability and microporous characteristics for sintered bodies of alumina-pillared fluorine micas

    • T. Yamaguchi
    • Y. Sakai
    • K. Kitajima

    OriginalPaper Pages: 5771 - 5776

11. Comprehensive study of the degradation of an intumescent EVA-based material during combustion

    • M. Le Bras
    • S. Bourbigot
    • B. Revel

    OriginalPaper Pages: 5777 - 5782

12. Preparation of nanosize SnO2 particles in an aerosol reactor by pyrolysis of tetra-n-butyl tin

    • Ki Young Kim
    • Seung Bin Park

    OriginalPaper Pages: 5783 - 5788

13. The influence of metals and carbides during laser surface modification of low alloy steel

    • M. H. McCay
    • N. B. Dahotre
    • M. A. Riley

    OriginalPaper Pages: 5789 - 5802

14. Sintering and crystallization of (SrO·SiO2)-(SrO·Al2O3·2SiO2) glass-ceramics

    • Yun-Mo Sung
    • Joon Sik Park

    OriginalPaper Pages: 5803 - 5809

15. Reactions between La1−x CaxMnO3 and CaO-stabilized ZrO2 Part II Diffusion couples

    • S. Faaland
    • M.-A. Einarsrud
    • R. Høier

    OriginalPaper Pages: 5811 - 5819

16. Secondary phases in natural magnesite sintered with addition of titania, ilmenite and zirconia

    • M. Chaudhuri
    • G. Banerjee
    • S. L. Sarkar

    OriginalPaper Pages: 5821 - 5825

17. A modification of tape casting for aligning the whiskers

    • Dong-Soo Park
    • Chang-Won Kim

    OriginalPaper Pages: 5827 - 5832

18. Effect of rare-earth (Eu, Yb and Ag) substitutions on superconducting properties of the Bi1.7Pb0.3 Sr2Ca2−xRx(R = Eu, Yb, and Ag)Cu3OY system

    • M. N. Khan
    • M. Khizar

    OriginalPaper Pages: 5833 - 5838

19. Brazing Al2O3 to sintered Fe-Ni-Co alloys

    • R. M. Do Nascimento
    • A. E. Martinelli
    • A. N. Klein

    OriginalPaper Pages: 5839 - 5845

20. Effect of applied potential on the nature of surface film and SCC of a high Mn stainless steel in 1 M HCl

    • A. Devasenapathi
    • M. Asawa

    OriginalPaper Pages: 5847 - 5851

21. The mechanical behavior of optical fiber sensor embedded within the composite laminate

    • Tae Seong Jang
    • Jung Ju Lee
    • Jeung-Soo Huh

    OriginalPaper Pages: 5853 - 5860

22. Analytical modelling of mechanical properties for rubber-toughened polymers

    • Qi-Zhi Wang
    • Dong-Joo Lee

    OriginalPaper Pages: 5861 - 5869

23. Viscoplastic modeling of ABS material under high-strain-rate uniaxial elongational deformation

    • S. Wang
    • A. Makinouchi
    • T. Nakagawa

    OriginalPaper Pages: 5871 - 5878

24. Densification model for powder compacts

    • David C. C. Lam

    OriginalPaper Pages: 5879 - 5884

25. Tetragonal to monoclinic transformation in Y-TZP joined with metallic materials

    • N. Yoshikawa
    • A. Kikuchi
    • T. Takahashi

    OriginalPaper Pages: 5885 - 5891

26. Hydrothermal precipitation of hydroxyapatite on anodic titanium oxide films containing Ca and P

    • H. Ishizawa
    • M. Ogino

    OriginalPaper Pages: 5893 - 5898

27. Interfacial reactions between Ti-6Al-4V alloy and zirconia mold during casting

    • Kun-Fung Lin
    • Chien-Cheng Lin

    OriginalPaper Pages: 5899 - 5906

28. Characterization of thermal behavior of mixed bismaleimides for composites

    • K. Krishnan
    • T. M. Vijayan
    • K. N. Ninan

    OriginalPaper Pages: 5907 - 5910

29. Control of the structure and properties of barium sulphate-filled blends of polypropylene and ethylene propylene copolymers

    • C. O. Hammer
    • F. H. J. Maurer
    • B. Pukánszky

    OriginalPaper Pages: 5911 - 5918

30. Two limits of melting temperatures of nanocrystals

    • Q. Jiang
    • Z. Zhang
    • M. Iskandar

    OriginalPaper Pages: 5919 - 5922

31. Wettability and surface free energy of zirconia ceramics and their constituents

    • M. L. González-Martín
    • L. Labajos-Broncano
    • J. M. Bruque

    OriginalPaper Pages: 5923 - 5926

32. The effect of time and temperature on flexural creep and fatigue strength of a silica particle filled epoxy resin

    • M. K. McMurray
    • Shigeo Amagi

    OriginalPaper Pages: 5927 - 5936

33. Nucleation kinetics of a Li2O·2SiO2 glass based on a liquid model

    • R. Ota
    • N. Mishima
    • J. Fukunaga

    OriginalPaper Pages: 5937 - 5941