1. High-capacity lithium sulfur battery and beyond: a review of metal anode protection layers and perspective of solid-state electrolytes

   • Yang Wang
   • Emily Sahadeo
   • Sang Bok Lee

   Review 05 November 2018 Pages: 3671 - 3693

   

2. Characterization of grain boundary disconnections in SrTiO₃ part I: the dislocation component of grain boundary disconnections

   • Hadas Sternlicht
   • Wolfgang Rheinheimer
   • Wayne D. Kaplan

   Ceramics 15 November 2018 Pages: 3694 - 3709

   

3. Characterization of grain boundary disconnections in SrTiO₃ Part II: the influence of superimposed disconnections on image analysis

   • Hadas Sternlicht
   • Wolfgang Rheinheimer
   • Wayne D. Kaplan

   Ceramics 20 November 2018 Pages: 3710 - 3725

   

4. Manufacture of glass and mirrors from lunar regolith simulant

   • Juergen Schleppi
   • Joseph Gibbons
   • Nick Bennett

   Ceramics Open access 19 November 2018 Pages: 3726 - 3747

   

5. 3D microstructure of magnesium potassium phosphate ceramics from X-ray tomography: new insights into the reaction mechanisms

   • Alberto Viani
   • Konstantinos Sotiriadis
   • Lucia Mancini

   Ceramics Open access 12 November 2018 Pages: 3748 - 3760

   

6. Observation of the transformation of silica phytoliths into SiC and SiO₂ particles in biomass-derived carbons by using SEM/EDS, Raman spectroscopy, and XRD

   • Enrique R. Yapuchura
   • Rodolfo S. Tartaglia
   • Francisco G. Emmerich

   Ceramics 15 November 2018 Pages: 3761 - 3777

   

7. Reaction mechanism and microstructure evolution of andalusite with zirconia

   • Weiqi Zhang
   • Suping Li
   • Yingying Ding

   Ceramics 21 November 2018 Pages: 3778 - 3785

   

8. Ethanol–water-assisted room temperature synthesis of CsPbBr₃/SiO₂ nanocomposites with high stability in ethanol

   • Wen Li
   • Fengjun Chun
   • Weiqing Yang

   Chemical routes to materials 07 November 2018 Pages: 3786 - 3794

   

9. High reusability and durability of carbon-doped TiO₂/carbon nanofibrous film as visible-light-driven photocatalyst

   • Lixin Song
   • Wanru Jing
   • Jie Xiong

   Chemical routes to materials 09 November 2018 Pages: 3795 - 3804

   

10. Synthesis of nitrogen-rich hollow microspheres for CO₂ adsorption

    • Fengqin Yin
    • Zhejia Wu
    • Shuixia Chen

    Chemical routes to materials 12 November 2018 Pages: 3805 - 3816

    

11. Preparation, characterization and catalytic performance of polyoxometalate immobilized on the surface of halloysite

    • Zhiyuan Ma
    • Ruiqiang Wang
    • Lihua Bi

    Chemical routes to materials 19 November 2018 Pages: 3817 - 3831

    

12. Improving the electroactive phase, thermal and dielectric properties of PVDF/graphene oxide composites by using methyl methacrylate-co-glycidyl methacrylate copolymers as compatibilizer

    • Shixin Song
    • Zaihang Zheng
    • Shulin Sun

    Composites 21 November 2018 Pages: 3832 - 3846

    

13. Improvement of mechanical properties and thermal conductivity of carbon fiber laminated composites through depositing graphene nanoplatelets on fibers

    • Fuzhong Wang
    • Xiaoxia Cai

    Composites 05 November 2018 Pages: 3847 - 3862

    

14. Transition from microcellular to nanocellular chain extended poly(lactic acid)/hydroxyl-functionalized graphene foams by supercritical CO₂

    • Xianzeng Wang
    • Jianguo Mi
    • Xiangdong Wang

    Composites 12 November 2018 Pages: 3863 - 3877

    

15. Design and efficient fabrication of micro-sized clusters of hydroxyapatite nanorods for dental resin composites

    • Shu-Ning Zhao
    • Dan-Lei Yang
    • Jian-Feng Chen

    Composites 26 November 2018 Pages: 3878 - 3892

    

16. Nonlinear electrical conductivity through the thickness of multidirectional carbon fiber composites

    • Xi Chen
    • Alexander Smorgonskiy
    • Farhad Rachidi

    Composites 19 November 2018 Pages: 3893 - 3903

    

17. Fabrication of well-isolated graphene and evaluation of thermoelectric performance of polyaniline–graphene composite film

    • Takuji Ube
    • Jun Koyanagi
    • Keishi Nishio

    Composites 15 November 2018 Pages: 3904 - 3913

    

18. Fabrication of superrepellent microstructured polypropylene/graphene surfaces with enhanced wear resistance

    • Anfu Chen
    • Sha Ding
    • Zhengrong Zhang

    Composites 20 November 2018 Pages: 3914 - 3926

    

19. Laser-induced synthesis and photocatalytic properties of hybrid organic–inorganic composite layers

    • R. Ivan
    • C. Popescu
    • E. György

    Composites 20 November 2018 Pages: 3927 - 3941

    

20. Size effects in lattice-structured cellular materials: edge softening effects

    • Marcus Yoder
    • Lonny Thompson
    • Joshua Summers

    Computation 07 November 2018 Pages: 3942 - 3959

    

21. Experimental and molecular dynamics simulation study on the damping mechanism of C5 petroleum resin/chlorinated butyl rubber composites

    • Chao Yin
    • Xiuying Zhao
    • Sizhu Wu

    Computation 20 November 2018 Pages: 3960 - 3974

    

22. Atomistic modeling of interfacial segregation and structural transitions in ternary alloys

    • Yang Hu
    • Timothy J. Rupert

    Computation 19 November 2018 Pages: 3975 - 3993

    

23. Hydrogen storage in MIL-88 series

    • Nguyen Thi Xuan Huynh
    • Viorel Chihaia
    • Do Ngoc Son

    Computation 20 November 2018 Pages: 3994 - 4010

    

24. Plasma-produced ZnO nanorod arrays as an antireflective layer in c-Si solar cells

    • Feifei Huang
    • Bin Guo
    • Qijin Cheng

    Electronic materials 09 November 2018 Pages: 4011 - 4023

    

25. Magnetic hollow mesoporous carbon composites with impedance matching for highly effective microwave absorption

    • Guozhu Shen
    • Junzhao Ren
    • Yewen Xu

    Electronic materials 07 November 2018 Pages: 4024 - 4037

    

26. Bandgap properties of a piezoelectric phononic crystal nanobeam based on nonlocal theory

    • Denghui Qian

    Electronic materials 12 November 2018 Pages: 4038 - 4048

    

27. Novel blue-light-emitting diodes based on nanostructured ZnSe/ZnS multilayer films

    • Kai Ou
    • Shenwei Wang
    • Lixin Yi

    Electronic materials 19 November 2018 Pages: 4049 - 4055

    

28. Design and energy transfer mechanism for single-phased Gd₂MgTiO₆: Bi³⁺, Eu³⁺ tunable white light-emitting phosphors

    • Wei Chen
    • Zhicong Liu
    • Xiaojuan Liang

    Electronic materials 20 November 2018 Pages: 4056 - 4072

    

29. Mesoporous magnetite nanoparticle-decorated graphene oxide nanosheets for efficient electrochemical detection of hydrazine

    • G. Vinodha
    • P. D. Shima
    • L. Cindrella

    Electronic materials 19 November 2018 Pages: 4073 - 4088

    

30. Spray pyrolysis of conductor- and binder-free porous FeS₂ films for high-performance lithium ion batteries

    • Shadi Al Khateeb
    • Taylor D. Sparks

    Energy materials 20 November 2018 Pages: 4089 - 4104

    

31. Vertically standing ultrathin MoS₂ nanosheet arrays on molybdenum foil as binder-free anode for lithium-ion batteries

    • Yifei Guo
    • Xingguo Qi
    • Zhijian Peng

    Energy materials 07 November 2018 Pages: 4105 - 4114

    

32. Exploring the solid-state interfacial reaction of Al/Fe₂O₃ nanothermites by thermal analysis

    • Xiang Zhou
    • Ying Zhu
    • Kaili Zhang

    Energy materials 13 November 2018 Pages: 4115 - 4123

    

33. Advanced sodium-ion pseudocapacitor performance of oxygen-implanted hard carbon derived from carbon spheres

    • Li Yin
    • Junlan Feng
    • Yongxing Lin

    Energy materials 19 November 2018 Pages: 4124 - 4134

    

34. Effect of the preparation method on the morphology and proton conductivity of membranes based on sulfonated ABA triblock copolymers

    • Natalia A. Agudelo
    • Juliana Palacio
    • Betty L. López

    Energy materials 14 November 2018 Pages: 4135 - 4153

    

35. Rapid microwave-irradiation synthesis of ZnCo₂O₄/ZnO nanocrystals/carbon nanotubes composite as anodes for high-performance lithium-ion battery

    • Ping Huang
    • Miao Zhang
    • Bingshe Xu

    Energy materials 13 November 2018 Pages: 4154 - 4167

    

36. Mesoporous, nitrogen-doped, graphitized carbon nanosheets embedded with cobalt nanoparticles for efficient oxygen electroreduction

    • Ni Zhou
    • Ligui Li
    • Yunpeng Qu

    Energy materials 14 November 2018 Pages: 4168 - 4179

    

37. One-pot facile route to fabricate the precursor of sulfonated graphene/N-doped mesoporous carbons composites for supercapacitors

    • Peng Chen
    • Chao Yang
    • Kunkun Guo

    Energy materials 19 November 2018 Pages: 4180 - 4191

    

38. Direct laser writing of graphene films from a polyether ether ketone precursor

    • Chenguang Zhu
    • Dongmei Zhao
    • Guan Zhang

    Energy materials 19 November 2018 Pages: 4192 - 4201

    

39. Preparing enhanced electrochemical performances Fe₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials by thermal decomposition of iron citrate

    • Yike Lei
    • Yonghu Li
    • Chunyan Lai

    Energy materials 12 November 2018 Pages: 4202 - 4211

    

40. One-pot co-precipitation synthesis of Fe₃O₄ nanoparticles embedded in 3D carbonaceous matrix as anode for lithium ion batteries

    • Qing Ai
    • Zewei Yuan
    • Songdong Yuan

    Energy materials 21 November 2018 Pages: 4212 - 4224

    

41. Nano-sized FeSe₂ anchored on reduced graphene oxide as a promising anode material for lithium-ion and sodium-ion batteries

    • Fanjun Kong
    • Linze Lv
    • Lei Gao

    Energy materials 20 November 2018 Pages: 4225 - 4235

    

42. Origin of efficiency enhancement in cell capture on nanostructured arrays

    • Jing Zhou
    • Yu Xiong
    • Tongsheng Chen

    Materials for life sciences 09 November 2018 Pages: 4236 - 4245

    

43. Silk fibroin coaxial bead-on-string fiber materials and their drug release behaviors in different pH

    • Huanjie Xi
    • Huijing Zhao

    Materials for life sciences 20 November 2018 Pages: 4246 - 4258

    

44. Improved wear, mechanical, and biological behavior of UHMWPE-HAp-zirconia hybrid nanocomposites with a prospective application in total hip joint replacement

    • Meysam Salari
    • Sara Mohseni Taromsari
    • Mohammad Ali Faghihi Sani

    Materials for life sciences 21 November 2018 Pages: 4259 - 4276

    

45. In vitro evaluation of the biocompatibility and bioactivity of plasma electrolyte oxidized titania/calcium phosphate nanocoatings on Ti

    • S. Abbasi
    • M. R. Bilesan
    • F. Golestani-Fard

    Materials for life sciences 26 November 2018 Pages: 4277 - 4286

    

46. Characterization and antimicrobial activity of a 2-O-methyl-β-cyclodextrin inclusion complex containing hexahydro-β-acids

    • Na Lu
    • Haining Xu
    • Yumei Liu

    Materials for life sciences 19 November 2018 Pages: 4287 - 4296

    

47. Si, N-codoped carbon dots: preparation and application in iron overload diagnosis

    • Songliang He
    • Suwen Qi
    • Wenwen Chen

    Materials for life sciences 21 November 2018 Pages: 4297 - 4305

    

48. Density measurement of Ti–X (X = Cu, Ni) melts and thermodynamic correlations

    • Manabu Watanabe
    • Masayoshi Adachi
    • Hiroyuki Fukuyama

    Metals 07 November 2018 Pages: 4306 - 4313

    

49. Macrodeformation twinning in a textured aluminum alloy via dynamic equal channel angular pressing

    • D. K. Qi
    • M. X. Tang
    • S. N. Luo

    Metals 09 November 2018 Pages: 4314 - 4324

    

50. Influence of solidification rate on the microstructure, mechanical properties, and thermal conductivity of cast A319 Al alloy

    • Eli Vandersluis
    • Comondore Ravindran

    Metals 09 November 2018 Pages: 4325 - 4339