1. Potential of Nanotechnology for Rural Applications

   • Subrata Mondal

   Review-Mechanical Engineering 01 February 2020 Pages: 5011 - 5042

   

2. Real-Time Impedance Control Based on Learned Inverse Dynamics

   • Muhammad Tufail
   • Shahzad Anwar
   • Muhammad Tahir Khan

   Research Article-Mechanical Engineering 18 January 2020 Pages: 5043 - 5055

   

3. Characterization and Parametric Optimization of Micro-hole Surfaces in Micro-EDM Drilling on Inconel 718 Superalloy Using Genetic Algorithm

   • Deepak G. Dilip
   • Satyananda Panda
   • Jose Mathew

   Research Article-Mechanical Engineering 21 January 2020 Pages: 5057 - 5074

   

4. An Insight into Diesel–Ethanol and Diesel–Biodiesel Blends Spraying and Co-combustion in HSDI Diesel Engine

   • Hadi Taghavifar
   • Simin Anvari

   Research Article - Mechanical Engineering 23 January 2020 Pages: 5075 - 5085

   

5. Mechanical Properties of Maize Stalk Nano-particle Reinforced Epoxy Composites

   • Johnson Olumuyiwa Agunsoye
   • Adeola A. Bamigbaiye
   • Suleiman Bolaji Hassan

   Research Article-Mechanical Engineering 23 January 2020 Pages: 5087 - 5097

   

6. Static Analysis of Thick Functionally Graded Plates with Different Property Distribution Functions

   • Sultan M. Ghazzawi
   • Wael G. Abdelrahman

   Research Article - Mechanical Engineering 27 January 2020 Pages: 5099 - 5108

   

7. Determination of Crater Morphology and 3D Surface Roughness in Wire Electrical Discharge Turning of Inconel 825

   • Jees George
   • Jose Mathew
   • R. Manu

   Research Article-Mechanical Engineering 27 January 2020 Pages: 5109 - 5127

   

8. An Investigation on Cutting of the MWCNTs-Doped Composite Plates by AWJ

   • Ferhat Ceritbinmez
   • Ahmet Yapici

   Research Article-Mechanical Engineering 29 January 2020 Pages: 5129 - 5141

   

9. Performance Improvement of a Single PEM Fuel Cell Using an Innovative Flow Field Design Methodology

   • H. Kahraman
   • A. Coban

   Research Article-Mechanical Engineering 29 January 2020 Pages: 5143 - 5152

   

10. Experimental Study of Heat Transfer Enhancement in Double-Pipe Heat Exchanger Integrated with Metal Foam Fins

    • Jinan A. Hamzah
    • Mohammed A. Nima

    Research Article-Mechanical Engineering 29 January 2020 Pages: 5153 - 5167

    

11. Numerical Investigations of Mini-Channel Heat Sink for Microprocessor Cooling: Effect of Slab Thickness

    • Hussain Ahmed Tariq
    • Muhammad Anwar
    • Abdullah Malik

    Research Article-Mechanical Engineering 30 January 2020 Pages: 5169 - 5177

    

12. A New Model and Analysis for Peristalsis of Carreau–Yasuda (CY) Nanofluid Subject to Wall Properties

    • Sana Maryam Kayani
    • S. Hina
    • M. Mustafa

    Research Article-Mechanical Engineering 31 January 2020 Pages: 5179 - 5190

    

13. A Shooting and Control Application of Four-Legged Robots with a Gun Turret

    • Ahmet Burak Tatar
    • Beyda Taşar
    • Oğuz Yakut

    Research Article-Mechanical Engineering 05 February 2020 Pages: 5191 - 5206

    

14. An Experimental Analysis and Parametric Simulation of Vibration-Based Piezo-Aeroelastic Energy Harvesting Using an Aerodynamic Wing Profile

    • Fevzi Cakmak Bolat

    Research Article-Mechanical Engineering 05 February 2020 Pages: 5207 - 5214

    

15. Alignment and Vibration Responses of High-Speed Alternator Couplings on Micro Gas Turbine

    • Ibrahim I. Enagi
    • K. A. Al-attab
    • Z. A. Zainal

    Research Article-Mechanical Engineering 06 February 2020 Pages: 5215 - 5225

    

16. Activation Energy Impact on Chemically Reacting Eyring–Powell Nanofluid Flow Over a Stretching Cylinder

    • S. R. R. Reddy
    • P. Bala Anki Reddy
    • A. M. Rashad

    Research Article-Mechanical Engineering 07 February 2020 Pages: 5227 - 5242

    

17. Simulation Examination for Nanoparticle Flow in a Permeable Enclosure via CVFEM Involving MHD Effect

    • Houman Babazadeh
    • Rakesh Kumar
    • Ahmad Shafee

    Research Article-Mechanical Engineering 11 February 2020 Pages: 5243 - 5257

    

18. On the Criticality Analysis of Computer Numerical Control Lathe Subsystems for Predictive Maintenance

    • Nikhil M. Thoppil
    • V. Vasu
    • C. S. P. Rao

    Research Article-Mechanical Engineering 11 February 2020 Pages: 5259 - 5271

    

19. Analysis of Integrated H₂O–LiBr Absorption Cooling and Single-Effect Evaporation Desalination System

    • Ahmed M. Shaaban
    • Mohamed A. Antar
    • Maged A. El-Shaarawi

    Research Article-Mechanical Engineering 12 February 2020 Pages: 5273 - 5284

    

20. Cooling Analysis of Cylindrical Void Method for an Injection Mould in Injection Moulding Process

    • Abdellah Abdellah El-Hadj
    • Shayfull Zamree Abd Rahim
    • Chye Lih Tan

    Research Article-Mechanical Engineering 12 February 2020 Pages: 5285 - 5294

    

21. Parameter Optimization in the Thermo-mechanical V-Bending Process to Minimize Springback of Inconel 625 Alloy

    • Anand Badrish
    • Ayush Morchhale
    • Swadesh Kumar Singh

    Research Article-Mechanical Engineering 15 February 2020 Pages: 5295 - 5309

    

22. Numerical Entropic Analysis of Mixed MHD Convective Flows from a Non-Isothermal Vertical Flat Plate for Radiative Tangent Hyperbolic Blood Biofluids Conveying Magnetite Ferroparticles: Dual Similarity Solutions

    • A. Zaib
    • Umair Khan
    • Mostafa Zaydan

    Research Article-Mechanical Engineering 20 February 2020 Pages: 5311 - 5330

    

23. Numerical Differential Quadrature Examination of Steady Mixed Convection Nanofluid Flows Over an Isothermal Thin Needle Conveying Metallic and Metallic Oxide Nanomaterials: A Comparative Investigation

    • M. K. Nayak
    • A. Wakif
    • M. Saidi Hassani Alaoui

    Research Article-Mechanical Engineering 21 February 2020 Pages: 5331 - 5346

    

24. A New Butterfly-Inspired Compliant Joint with 3-DOF In-plane Motion

    • Ngoc Thoai Tran
    • Ngoc Le Chau
    • Thanh-Phong Dao

    Research Article-Mechanical Engineering 26 February 2020 Pages: 5347 - 5361

    

25. Dynamic Behaviour of Spindle on Large EDM Machine Induced by High-Speed Jump Motion with Different Control Strategies

    • Zhaoxi Zhao
    • Yukui Wang
    • Jianyong Liu

    Research Article - Mechanical Engineering 27 February 2020 Pages: 5363 - 5374

    

26. Effect of Metal–Fiber Shear Interaction on Curing Deformation of Fiber Metal Laminates

    • Zhenyi Yuan
    • Guigeng Yang
    • Yan Li

    Research Article-Mechanical Engineering 28 February 2020 Pages: 5375 - 5384

    

27. Energetic and Exergetic Performance of Solar-Assisted Direct Expansion Air-Conditioning System with Low-GWP Refrigerants in Different Climate Locations

    • Khelifa Salhi
    • Khaled Mohamed Ramadan
    • Abderrahmane Hamidat

    Research Article-Mechanical Engineering 29 February 2020 Pages: 5385 - 5398

    

28. Experimental Investigation of the Surface Roughness of Finish-Machined High-Volume-Fraction SiCp/Al Composites

    • Jinfeng Wang
    • Lijuan Pan
    • Yuqian Lu

    Research Article-Mechanical Engineering 02 March 2020 Pages: 5399 - 5406

    

29. A Study on Temperature Rise, Tool Wear, and Surface Roughness During Drilling of Al–5%SiC Composite

    • K. Thirukkumaran
    • M. Menaka
    • B. Venkatraman

    Research Article-Mechanical Engineering 04 March 2020 Pages: 5407 - 5419

    

30. The Effect of the Brake Location and Gear Defects on the Dynamic Behavior of a Wind Turbine

    • Ahmed Ghorbel
    • Oussama Graja
    • Mohamed Haddar

    Research Article-Mechanical Engineering 04 March 2020 Pages: 5421 - 5433

    

31. Feasibility of Using CeO₂/Water Dielectrical Nanofluid in Electrical Discharge Machining (EDM)

    • Md Moktar Hossain
    • Mohd Sayuti Bin Ab Karim
    • Mohamad Sofian Bin Abu Talip

    Research Article-Mechanical Engineering 05 March 2020 Pages: 5435 - 5445

    

32. The Flow Structure in the Narrow Gaps of Compound Channels: The Basic Flow

    • M. S. Guellouz
    • F. Souissi
    • N. Ben Salah

    Research Article-Mechanical Engineering 06 March 2020 Pages: 5447 - 5458

    

33. Flow and Thermal Fields of a Ferrofluid in Rectangular Enclosures with Two Heated Fins Under Effects of a Variable Electromagnetic Force-Dependent Viscosity

    • Z. Z. Rashed

    Research Article-Mechanical Engineering 09 March 2020 Pages: 5459 - 5469

    

34. Impact of Entropy Generation and Nonlinear Thermal Radiation on Darcy–Forchheimer Flow of MnFe₂O₄-Casson/Water Nanofluid due to a Rotating Disk: Application to Brain Dynamics

    • Sachin Shaw
    • A. S. Dogonchi
    • O. D. Makinde

    Research Article-Mechanical Engineering 10 March 2020 Pages: 5471 - 5490

    

35. Experımental and Numerıcal Analysis of the Effect of Components on a Double-Sided PCB on LED Junction Temperature and Light Output Using CFD

    • Kemal Furkan Sokmen
    • Osman Bedrettin Karatas

    Research Article-Mechanical Engineering 12 March 2020 Pages: 5491 - 5504

    

36. Investigation of Physico-mechanical Behavior, Permeability and Wall Shear Stress of Porous HA/PMMA Composite Bone Scaffold

    • Babar Pasha Mahammod
    • Emon Barua
    • Krishna Murari Pandey

    Research Article-Mechanical Engineering 13 March 2020 Pages: 5505 - 5515

    

37. A Comparative Study of Solar Heat Transfer on Roof-Top Water Storage Tank Orientations in Saudi Arabia

    • Ahmed S. Sowayan

    Research Article-Mechanical Engineering 18 March 2020 Pages: 5517 - 5528

    

38. Unsteady Stagnation Point Flow of Maxwell Nanofluid Over Stretching Disk with Joule Heating

    • Awais Ahmed
    • Masood Khan
    • Zahoor Iqbal

    Research Article-Mechanical Engineering 23 March 2020 Pages: 5529 - 5540

    

39. Hybrid Friction Diffusion Bonding of Tube–Tubesheet Joint: A finite Element Model

    • Fadi Al-Badour
    • Abdelaziz Bazoune

    Research Article-Mechanical Engineering 30 March 2020 Pages: 5541 - 5554

    

40. Application of TGRA-Based Optimisation for Machinability of High-Chromium Tool Steel in the EDM Process

    • Phan Huu Nguyen
    • Tien Long Banh
    • Duc Toan Nguyen

    Research Article-Mechanical Engineering 31 March 2020 Pages: 5555 - 5562

    

41. Optimization of CNC-WEDM Parameters for AA2024/ZrB2 in situ Stir Cast Composites Using Response Surface Methodology with Desirability Function Technique

    • N. Muralidharan
    • K. Chockalingam
    • N. Nithyavathy

    Research Article-Mechanical Engineering 02 April 2020 Pages: 5563 - 5579

    

42. Mean Value Coordinate-Based 2D DDA for Detailed Stress Analysis

    • Yanhai Wang
    • Wei Jiang
    • Nannan Wang

    Research Article-Mechanical Engineering 06 April 2020 Pages: 5581 - 5601

    

43. Performance of Functionalized MWCNT–Water Nanofluids for Heat Transfer Applications

    • Rosaniza Md Isa
    • Mohd Saidina Dandan Satia
    • Mohd Zulkifly Abdullah

    Research Article-Mechanical Engineering 09 April 2020 Pages: 5603 - 5614

    

44. Influence of Curvature and Cross-sectional Shape of Cylindrical Surface Formed by Turning on Its Roughness

    • Petro Kryvyi
    • Volodymyr Dzyura
    • Ilya Vlasov

    Research Article-Mechanical Engineering 10 April 2020 Pages: 5615 - 5622

    

45. Experimental and Numerical Investigation of Quasi-Static (10⁻³ s⁻¹) Fracture Behavior of Armor Steel

    • Ambuj Saxena
    • Adepu Kumaraswamy
    • Mahesh Pandey

    Research Article-Mechanical Engineering 11 April 2020 Pages: 5623 - 5629

    

46. Excogitating Material Rankings Using Novel Aggregation Multiplicative Rule (AMR): A Case for Material Selection Problems

    • Divya Zindani
    • Saikat Ranjan Maity
    • Sumit Bhowmik

    Research Article-Mechanical Engineering 13 April 2020 Pages: 5631 - 5646

    

47. Grain Size Optimization Using PSO Technique for Maximum Tensile Strength of Friction Stir-Welded Joints of AA1100 Aluminium

    • N. Pallavi Senapati
    • R. K. Bhoi

    Research Article-Mechanical Engineering 17 April 2020 Pages: 5647 - 5656

    

48. Experimental Investigation of the Effect of Air Injection on Performance and Detection of Cavitation in the Centrifugal Pump Based on Vibration Technique

    • Ahmed Ramadhan Al-Obaidi
    • Rakesh Mishra

    Research Article-Mechanical Engineering 20 April 2020 Pages: 5657 - 5671

    

49. Machinability of Ti–6Al–4V Superalloy: Performance of Dry Cutting and Nanofluid MQL (MWCNT-Added Rice Bran Oil)

    • Thrinadh Jadam
    • Merugu Rakesh
    • Saurav Datta

    Research Article-Mechanical Engineering 20 April 2020 Pages: 5673 - 5695

    

50. Comparative Performance of Low-GWP Refrigerants as Substitutes for R134a in a Vapor Compression Refrigeration System

    • Ameer Hamza
    • Tauseef Aized Khan

    Research Article-Mechanical Engineering 22 April 2020 Pages: 5697 - 5712