1. A Comprehensive Review of Saline Water Correlations and Data: Part II—Thermophysical Properties

   • Naef A. A. Qasem
   • Muhammad M. Generous
   • Syed M. Zubair

   Review-Mechanical Engineering 23 January 2021 Pages: 1941 - 1979

   

2. Filtration of Radiating and Reacting SWCNT–MWCNT/Water Hybrid Flow with the Significance of Darcy–Forchheimer Porous Medium

   • S. Suganya
   • M. Muthtamilselvan
   • Deog-Hee Doh

   Research Article-Mechanical Engineering 30 September 2020 Pages: 1981 - 1995

   

3. Peristaltic Transport of a Casson Fluid in a Non-uniform Inclined Tube with Rosseland Approximation and Wall Properties

   • Z. Abbas
   • M. Y. Rafiq
   • T. Javed

   Research Article-Mechanical Engineering 30 September 2020 Pages: 1997 - 2007

   

4. Influence of Electrical Discharge Machining on Thermal Barrier Coating in a Two-Step Drilling of Nickel-Based Superalloy

   • Changshui Gao
   • Zhuang Liu
   • Chao Guo

   Research Article-Mechanical Engineering 06 October 2020 Pages: 2009 - 2020

   

5. Hybrid Ray Tracing Model and Particle Swarm Optimization for the Performance of an Internally Reflecting Solar Still with a Booster Reflector

   • N. U. Rehman
   • M. Uzair

   Research Article-Mechanical Engineering 14 October 2020 Pages: 2021 - 2032

   

6. Simultaneous Influence of Hall and Wall Characteristics in Peristaltic Convective Carbon–Water Flow Subject to Soret and Dufour Effects

   • Zakir Hussain
   • Taseer Muhammad

   Research Article-Mechanical Engineering 16 October 2020 Pages: 2033 - 2046

   

7. Squeezing Flow of Carbon Nanotubes-Based Nanofluid in Channel Considering Temperature-Dependent Viscosity: A Numerical Approach

   • Z. Ahmed
   • S. Saleem
   • A. U. Khan

   Research Article-Mechanical Engineering 19 October 2020 Pages: 2047 - 2053

   

8. A Statistical Method to Predict the Hardness and Grain Size After Equal Channel Angular Pressing of AA-6063 with Intermediate Annealing

   • Sunil Kadiyan
   • Brijnandan S. Dehiya
   • Meenu Saini

   Research Article-Mechanical Engineering 20 October 2020 Pages: 2055 - 2070

   

9. Experimental Determination, Modelling and Prediction of Sliding Wear of Hybrid Polymer Composites Using RSM and Fuzzy Logic

   • Agnivesh Kumar Sinha
   • Harendra Kumar Narang
   • Somnath Bhattacharya

   Research Article-Mechanical Engineering 26 October 2020 Pages: 2071 - 2082

   

10. Design and Optimization of Multistage Tubular–Mandrel System for Down-Hole Expandable Tubular

    • Rashid Khan

    Research Article-Mechanical Engineering 26 October 2020 Pages: 2083 - 2095

    

11. Finite Element Modeling for Comparing the Machining Performance of Different Electrolytes in ECDM

    • Viveksheel Rajput
    • Mudimallana Goud
    • Narendra Mohan Suri

    Research Article-Mechanical Engineering 26 October 2020 Pages: 2097 - 2119

    

12. Experimental Evaluation of Performance Characteristics of a Horizontal Copper Mesh Wick-Based Miniature Loop Heat Pipe

    • Muhammad Sajid Kamran
    • Kashifa Naz
    • Mudather Ibrahim Mudather Zeinelabdeen

    Research Article-Mechanical Engineering 26 October 2020 Pages: 2121 - 2132

    

13. Multi-objective Optimization of Ms58 Brass Machining Operation by Multi-axis CNC Lathe

    • Ömer Seçgin

    Research Article-Mechanical Engineering 27 October 2020 Pages: 2133 - 2145

    

14. Investigation of Optimized Parameters for Magnetorheological Finishing the Internal Surface of the Cast-Iron Cylindrical Molds

    • Sunil Kumar Paswan
    • Anant Kumar Singh

    Research Article-Mechanical Engineering 27 October 2020 Pages: 2147 - 2164

    

15. Prediction Model of Dilatancy Stress Based on Brittle Rock: A Case Study of Sandstone

    • K. W. Cao
    • N. M. Khan
    • Y. C. Bian

    Research Article-Mechanical Engineering 29 October 2020 Pages: 2165 - 2176

    

16. Selection of Optimum Heat Flux Distribution in Pipe Flow Under Laminar Forced Convection

    • Muhammad Ahmad Jamil
    • S. Z. Shuja
    • Syed M. Zubair

    Research Article--Mechanical Engineering 02 November 2020 Pages: 2177 - 2190

    

17. Experimental Investigation of the Effect of Fuel Injection Timing and Injector Opening Pressure on Performance and Emissions Characteristics of a Turbo-Charged Diesel Engine Under 8-mode Testing Cycle

    • Ghulam Rasool
    • Asad Naeem Shah
    • Syed Asad Raza Gardezi

    Research Article-Mechanical Engineering 03 November 2020 Pages: 2191 - 2200

    

18. Investigation of High-Speed Flow Control from CD Nozzle Using Design of Experiments and CFD Methods

    • Abdul Aabid
    • Sher Afghan Khan

    Research Article-Mechanical Engineering 04 November 2020 Pages: 2201 - 2230

    

19. Microstructural Properties of Fe–Cr–C/NbC Composite Coating Produced on Medium Carbon Steel Surface by TIG Coating Process

    • Gul Tosun
    • Soner Buytoz

    Research Article--Mechanical Engineering 04 November 2020 Pages: 2231 - 2241

    

20. Electrochemical Micromachining of Hastelloy C276 by Different Electrolyte Solutions

    • Gowtham Kumarasamy
    • Poovazhagan Lakshmanan
    • Geethapriyan Thangamani

    Research Article-Mechanical Engineering 05 November 2020 Pages: 2243 - 2259

    

21. Microstructural and Mechanical Properties of One-Step Quenched and Partitioned 65Mn Steel

    • Muhammad Arslan Hafeez

    Research Article-Mechanical Engineering 09 November 2020 Pages: 2261 - 2267

    

22. An Experimental Investigation of Surface Characterization for Zirconia Ceramic Using Electrochemical Discharge Machining Process

    • Manoj Kumar
    • R. O. Vaishya
    • Alakesh Manna

    Research Article-Mechanical Engineering 11 November 2020 Pages: 2269 - 2281

    

23. Experimental Investigation and Parametric Optimization on Hole Quality Assessment During Micro-drilling of Inconel 625 Superalloy

    • K. Venkatesan
    • Kandru Udaya Nagendra
    • Ajay Earnest Cotton

    Research Article-Mechanical Engineering 12 November 2020 Pages: 2283 - 2309

    

24. Experimental Investigation on Tool Wear in AISI H13 Die Steel Turning Using RSM and ANN Methods

    • R. Suresh
    • Ajith G. Joshi
    • M. Manjaiah

    Research Article--Mechanical Engineering 12 November 2020 Pages: 2311 - 2325

    

25. Experimental Study on the Effect of Cutting Tool Geometry in Micro-Milling of Inconel 718

    • K. Aslantas
    • L. K. H. Alatrushi

    Research Article--Mechanical Engineering 16 November 2020 Pages: 2327 - 2342

    

26. Optimization of Design Parameters Affecting the Performance of a Magnetic Fluid Rotary Seal

    • Saurabh Parmar
    • R. V. Upadhyay
    • Kinnari Parekh

    Research Article-Mechanical Engineering 16 November 2020 Pages: 2343 - 2348

    

27. Nonlinear Mixed Convection Impact on Radiated Flow of Nanomaterials Subject to Convective Conditions

    • M. Waqas
    • Ikram Ullah
    • A. Alsaedi

    Research Article-Mechanical Engineering 17 November 2020 Pages: 2349 - 2359

    

28. A Study of the Effect of Conventional Drilling and Helical Milling in Surface Quality in Titanium Ti-6Al-4V and Ti-6AL-7Nb Alloys for Medical Applications

    • A. J. Festas
    • R. B. Pereira
    • J. P. Davim

    Research Article-Mechanical Engineering 17 November 2020 Pages: 2361 - 2369

    

29. Machining Performance of Inconel 718 Under Dry, MQL, and Nanofluid MQL Conditions: Application of Coconut Oil (Base Fluid) and Multi-walled Carbon Nanotubes as Additives

    • Subham Sarkar
    • Saurav Datta

    Research Article-Mechanical Engineering 17 November 2020 Pages: 2371 - 2395

    

30. Investigation on an Innovative Internally Cooled Smart Cutting Tool with the Built-in Cooling-Control System

    • Erkan Öztürk
    • Kemal Yıldızlı
    • Fatih Sağlam

    Research Article-Mechanical Engineering 18 November 2020 Pages: 2397 - 2411

    

31. Numerical Simulations of Time-Dependent Micro-Rotation Blood Flow Induced by a Curved Moving Surface Through Conduction of Gold Particles with Non-uniform Heat Sink/Source

    • Yu-Ming Chu
    • Umair Khan
    • A. Zaib

    Research Article-Mechanical Engineering 23 November 2020 Pages: 2413 - 2427

    

32. Development of Prediction Model for Conductive Pattern Lines Generated Through Positive Displacement Microdispensing System Using Artificial Neural Network

    • Muhammad Abas
    • Khawar Naeem
    • Khalid Rahman

    Research Article-Mechanical Engineering 27 November 2020 Pages: 2429 - 2442

    

33. Artificial Intelligence Approaches to Estimate the Transport Energy Demand in Turkey

    • Mert Sinan Turgut
    • Uğur Eliiyi
    • Deniz Türsel Eliiyi

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2443 - 2476

    

34. Comparative Energy and Emission Analysis of Oxy-Combustion and Conventional Air Combustion

    • Ibrahim Ozsari
    • Yasin Ust
    • Hasan Kayhan Kayadelen

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2477 - 2492

    

35. Bioconvection in a Convectional Nanofluid Flow Containing Gyrotactic Microorganisms over an Isothermal Vertical Cone Embedded in a Porous Surface with Chemical Reactive Species

    • M. Venkata Subba Rao
    • K. Gangadhar
    • P. Surekha

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2493 - 2503

    

36. Natural and Mixed Convection Study of Isothermally Heated Cylinder in a Lid-Driven Square Enclosure Filled with Nanofluid

    • Manoj Kr. Triveni
    • Rajsekhar Panua

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2505 - 2525

    

37. Reproducibility of Replicated Trabecular Bone Structures from Ti6Al4V Extralow Interstitials Powder by Selective Laser Melting

    • Arif Balcı
    • Furkan Küçükaltun
    • Teyfik Demir

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2527 - 2541

    

38. Liquid Paraffin Thermal Conductivity with Additives Tungsten Trioxide Nanoparticles: Synthesis and Propose a New Composed Approach of Fuzzy Logic/Artificial Neural Network

    • Chuan Sun
    • Somaye Taherifar
    • Quang-Vu Bach

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2543 - 2552

    

39. Effects of Graphite and Boron Carbide Powders Mixed into Dielectric Fluid on Electrical Discharge Machining of SKD 11 Tool Steel

    • Niwat Mookam
    • Piyawan Sunasuan
    • Suppawat Chuvaree

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2553 - 2563

    

40. A Transient Model of a Variable Geometry Turbocharger Turbine Using a Passive Actuator

    • Irfan Bahiuddin
    • Saiful Amri Mazlan
    • Ubaidillah

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2565 - 2577

    

41. Production and Characterization of Ceramic Bushings from Alumina-Toughened Yttrium-Stabilized Tetragonal Zirconia Composites for Projection Welding Applications

    • Arife Yurdakul

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2579 - 2588

    

42. Real-Time Stabilization Control of a Rotary Inverted Pendulum Using LQR-Based Sliding Mode Controller

    • Ishan Chawla
    • Ashish Singla

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2589 - 2596

    

43. Analysis of the Vibration Characteristic of an Experimental Turning Lathe Using Artificial Neural Networks

    • Mehmet Bahadır Çetinkaya
    • Emir Esim
    • Muhammed İşci

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2597 - 2611

    

44. Design of Optimal Parameter for Solid-State Welding of EN 10028-P355 GH Steel Using gray Incidence Reinforced Response Surface Methodology

    • G. Senthilkumar
    • R. Ramakrishnan

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2613 - 2628

    

45. Effects of Shell Aspect Ratio and Combustion Chamber Location on Thermal–Hydraulic Performance of Hot-Water Steel Boilers Under Steady-State Operation

    • Rahim Hassanzadeh
    • Reza Rahimi
    • Hakan Pekel

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2629 - 2648

    

46. The Roadheader Auto-Rectification Dynamic Analysis and Control Based on the Roadway Floor Mechanic Characteristics

    • Minjun Zhang
    • Fuyan Lyu
    • Miao Wu

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2649 - 2661

    

47. Radiused Edge Blade Tip for a Wider Operating Range in Wells Turbine

    • P. Madhan Kumar
    • Paresh Halder
    • Abdus Samad

    Research Article-Mechanical Engineering 03 January 2021 Pages: 2663 - 2676

    

48. Design, Integrating and Controlling of Mig-Based Shaped Metal Deposition System with Externally Cold Wire Feed in Additive Layered Manufacturing Technology

    • Hassan J. Khaudair
    • Adnan A. Ugla
    • Ahmed R. J. Almusawi

    Research Article-Mechanical Engineering 05 January 2021 Pages: 2677 - 2690

    

49. Tribological Performance of Sub-Micron Al₂O₃-Reinforced Aluminum Composite Brake Rotor Material

    • M. M. A. Baig
    • A. M. Al-Qutub
    • Abdul Samad Mohammed

    Research Article-Mechanical Engineering 05 January 2021 Pages: 2691 - 2700

    

50. Nodal/Saddle Stagnation Point Slip Flow of an Aqueous Convectional Magnesium Oxide–Gold Hybrid Nanofluid with Viscous Dissipation

    • Kotha Gangadhar
    • R. Edukondala Nayak
    • T. Kannan

    Research Article-Mechanical Engineering 05 January 2021 Pages: 2701 - 2710