Abstract
There has been a constant rise in interest on the subjects of robotics and additive manufacturing. Although robotics being older than additive manufacturing, both subjects have gained increased publicity in terms of research over the years. The objective of this paper is to review 3D printing, robotics education, and finally how 3D printing has contributed to robotics education over a period of ten years between 2011 and 2020. the last ten (10) years. By restricting the search to academic articles only, papers comprising of journal papers and conference proceedings were reviewed. For each paper, three information were sought which includes; robotics education, 3D printing, and finally how these two have been used together. We expect that the result of this review will serve as a pivot for schools at all levels to combine both subject areas and include the union into their STEM curricula which is believed to improve robotics education. The review shows that both tertiary and lower educational levels of robotics education benefit immensely from 3D printing. We also find out that most of the contributions of 3D printing to robotics education comes more in the form of using already printed parts rather than using the 3D printer itself. The challenges and trends are highlighted and future research directions have been suggested in this paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Manzoor S et al (2014) An open-source multi-DOF articulated robotic educational platform for autonomous object manipulation. Robot Comput Integr Manuf 30(3):351–362
Huang T-C, Lin C-Y (2017) From 3D modeling to 3D printing: development of a differentiated spatial ability teaching model. Telematics Inform 34(2):604–613
Kim C et al (2015) Robotics to promote elementary education pre-service teachers’ STEM engagement, learning, and teaching. Comput Educ 91:14–31
Timothy WS, Christopher BW, Michael H (2017) Preparing industry for additive manufacturing and its application: summary and recommendations from a national science foundation workshop. Add Manuf 13:166–178
Ford S, Minshall T (2019) Invited review article: Where and how 3D printing is used in teaching and education. Add Manuf 25:131–150
Cheng Y-W, Sun P-C, Chen N-S (2018) The essential applications of educational robot: requirement analysis from the perspectives of experts, researchers and instructors. Comput Educ 126:399–416
Ramli R, Yunus MM, Ishak NM (2011) Robotic teaching for Malaysian gifted enrichment program. Procedia Soc Behav Sci 15:2528–2532
Hagele M, Nilsson K, Pires JN (2008) Industrial robotics, in Springer handbook of robotics. Springer, Berlin, Heidelberg
Li L, Haghighi A, Yang Y (2018) A novel 6-axis hybrid additive-subtractive manufacturing process: design and case studies. J Manuf Process 33:150–160
Xia L, Zhong B (2018) A systematic review on teaching and learning robotics content knowledge in K-12. Comput Educ 127:267–282
Ospennikova E, Ershov M, Iljin I (2015) Educational robotics as an inovative educational technology. Procedia Soc Behav Sci 214:18–26
Raza K, Khan TA, Abbas N (2018) Kinematic analysis and geometrical improvement of an industrial robotic arm. J King Saud Univ Eng Sci 30(3):218–223
Shih BY, Chen TH, Wang SM, Chen CY (2013) The exploration of applying LEGO NXT in the situated science and technology learning. J Baltic Sci Educ 12(1):73–91 (2013)
Scaradozzi D et al (2015) Teaching robotics at the primary school: an innovative approach. Procedia Soc Behav Sci 174:3838–3846
Gomoll A et al (2016) Dragons, ladybugs, and softballs: Girls’ STEM engagement with human-centered robotics. J Sci Educ Technol 25(6):899–914
Master A et al (2017) Programming experience promotes higher STEM motivation among first-grade girls. J Exp Child Psychol 160:92–106
Benitti FBV (2012) Exploring the educational potential of robotics in schools: a systematic review. Comput Educ 58(3):978–988
da Neto MBS, de Mendonça JMC, de Sena APC (2015) Development and control of a prototype manipulator SCARA type as teaching tool. IFAC-Papers OnLine 48(19):209–213 (2015)
Raffaele G, Riccardo F, Claudio M (2014) Robotic competitions—teaching robotics and real-time programming with LEGO mindstorms. In: International federation of automatic control, Cape Town, South Africa
Balaji M et al (2015) Robotic training to bridge school students with engineering. Procedia Comput Sci 76:27–33
Zdesar A, Saso B, Gregor K (2017) Engineering education in wheeled mobile robotics. In: International federation of automatic control. Elsevier, pp 12173–12178
Timo O et al. (2011) Robot competition as a teaching and learning platform, in international federation of automatic control. Milano, Italy
Linert J, Kopacek P (2016) Robots for education (edutainment). In: International federation of automatic control
Akagi T et al (2015) Systematic educational program for robotics and mechatronics engineering in OUS using robot competition. Procedia Comput Sci 76:2–8
Sergey F et al (2017) Teaching robotics in secondary school. In: International federation of automatic control, pp 12155–12160
Sergey F et al (2017) Teaching of robotics and control jointly in the University and in the high school based on LEGO mindstorm NXT. In: International federation of automatic control
Vasilis K, Vasilis N, Christos G (2014) Open source 3D printing as a means of learning: an educational experiment in two high school in greece. Telematics Inform 32(1):118–128
Sergey F et al. (2017) Teaching robotics in secondary school examples and outcomes. In: International federation of automatic control
Montironi MA, Eliahu DS, Cheng HH (2015) A robotics-based 3D modelling curriculum for K-12 education. In: ASEE annual conference and exposition, pp 1–14
Williams WB, Schaus EJ (2015) Additive manufacturing of robot components for a capstone senior design experience. In: ASEE Annual conference and exposition, American social for engineering education, Seatle, WA, pp 26.157.1–26.157.15
Willia FC et al (2016) MAKER: applications of 3D printing and laser cutting in the development of automous robotics. In: ASEE annual conferences and exposition. ASEE: New Orleans, LA
Xiwei L et al (2017) A new framework of science and technology innovation education for K-12 in Qingdao, China. In: ASEE international forum, ASEE: Columbus, Ohio
de Sampaio CP et al (2013) 3D printing in graphic design education: educational experiences using fused deposition modelling (FDM) in a Brazilian University. In: 6th International conferences advance research virtual rapid prototyping
Ismianti H (2020) Adoption of 3D printing in indonesia and prediction of its application. In: 2025 IOP Conference series: materials science and engineering IoP Publishing. In Press
Attaran M (2017) The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus Horiz 60(5):677–688
Matthieu L et al (2014) Poppy project: open-source fabrication of 3D printed humanoid robot for science. Education and Art, Digital Intell
Barbieri L et al (2018) Design, prototyping and testing of a modular small-sized underwater robotic arm controlled through a Master-Slave approach. Ocean Eng 158:253–262
Schreiber F, Manns M, Morales J (2019) Design of an additively manufactured soft ring-gripper. In: International conference on changeable, agile, reconfigurable and virtual production, pp 142–147
Gutierrez SC, Zotovic R, Navarro MD, Meseguer MD (2017) Design and manufacturing of a prototype of a lightweight robot arm. In: Manufacturing engineering society international conference, MESIC 2017, pp 283–290
Aburaia M, Markl E, Stuja K (2015) New concept for design and control of 4 Axis robot using the additive manufacturing technology. Procedia Eng 100:1364–1369
Stefan J, Rebecca M (2015) New approach to introduction of 3D digital technologies in design education. In: Design conferences onnovative product creation, pp 35–40
Krupke D et al (2015) Printable modular robot: an application of rapid prototyping for flexible robot design. Ind Robot An Int J 42:149–155
Andy P (2014) Building a culture of creation. Teach Libarian 41(5):12–16
Glen B et al (2014) Advancing Childern’s engineering thorugh desktop manufacturing. In: Spector JM et al (ed) Handbook research education communication technology, Springer Science, New York, pp 675–688
Glen B et al (2015) An educational framework for digital manufacturing in schools. Add Manuf 2:42–49
Loy J (2014) e-Learning and e-making: 3D printing blurring the digital and the physical. Educ Sci 4:108–121
Kayfi R, Ragab D, Tutunji TA (2015) Mechatronic system design project: a 3D printer case study. In: 2015 IEEE Jordan conference on applied electrical engineering and computing technologies (AEECT), pp 1–6 (2015)
Jaksic NI (2014) New inexpensive 3D printersopen doors to novel experimental learning practices in engineering education. In: ASEE annual conference and exposition, pp 1–23
Warren R, Yalcin E, Eric MC (2014) An autonomous arduino-based racecar for first-year engineering technology students In: ASEE annual conference and exposition, ASEE: Indianapolis, IN (2014)
Armesto L, Fuentes-Dura P, Perry D (2015) Low-cost printable robots in education. J Intell Robot Syst Theory 81:5–24
Wong N, Cheng, HH (2016) CPSbot: a low cost reconfigurable and 3D printed robotics kit for education and research on cyber-physical systems. In 12th IEEE/ASME international conference on mechatronic and embedded systems and applications (MESA), pp 1–6
Ziaeefard S, Ribeiro GA, Mahmoudian N (2015) GUPPIE underwater printed robot; a game changer in control design education. In: American control conference (ACC), pp 2789–2794
Gonzalez-Gomez J et al (2012) A new open source 3D printable mobile robotic platform for education. In: 6th International symposium autonomous minirobots research edutainment
Kuat T, Yedige T, Almas S (2015) A low-cost open-source 3D printed three-finger gripper platform for research and educational purposes. J Rapid Open Access Publishing 3:638–647
Spendlove T (2016) Maker: 3D printing and designing with robot chassis. In: ASEE annual conferences and exposition, ASEE: New Orleans, LA
Valero-Gomez A et al (2012) Printable creativity in plastic valley UC3M. In: EDUCON 2012, IEEE, Editor, pp 1–9
Martinez MO et al (2016) 3D printed haptic devices for educational applications. In: IEEE haptic symposium, pp 126–133
Cesar V et al (2015) Design and evaluation of a DIY construction system for educational robot kits. Int J Technol Des Educ
Ryan WK, Chad TV (2017) Maker: a 3D printed balancing robot for teaching dynamic systems and control. In ASEE. ASEE, pp 1–8
Mitsuhashi K et al (2015) Production and education of the modular robot made by 3D printier. In: 2015 10th Asian control conference (ASCC), pp 1–5
Range K, Dana R., Tarek AT (2015) Mechatronic system design project: A 3D printer case study. In: IEEE Jordan Conference on applied electrical engineering and computing technologies (AEECT), pp 1–6
Chealsea S et al (2015) Open-source 3D printing technologies for education: bringing additive manufacturing to the classroom. J Visual Lang Comput 28:226–237
Acknowledgements
This work was supported by the Tertiary Education Trust Fund (TETFund), through Bayero University Kano, Nigeria.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Abdullahi, A.Y., Hamza, M.F., Isa, A.I. (2022). A Survey on the Contributions of 3D Printing to Robotics Education—A Decade Review. In: Ab. Nasir, A.F., Ibrahim, A.N., Ishak, I., Mat Yahya, N., Zakaria, M.A., P. P. Abdul Majeed, A. (eds) Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, vol 730. Springer, Singapore. https://doi.org/10.1007/978-981-33-4597-3_27
Download citation
DOI: https://doi.org/10.1007/978-981-33-4597-3_27
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-4596-6
Online ISBN: 978-981-33-4597-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)