1. Editorial: The April 2023 cover paper

   • Maude Jimenez

   Editorial 31 March 2023 Pages: 5571 - 5573

   

2. One-step synthesis of CdS/BiOCl: efficient visible light reactive photocatalysts with Z-scheme heterogeneous structure

   • Yueyi Li
   • Yuehui Liu
   • Xia Li

   Chemical routes to materials 14 March 2023 Pages: 5574 - 5586

   

3. Fabrication of recyclable magnetic Fe₃O₄–SiO₂–Cu₂O/Cu core–shell nano-catalyst for high-efficient reduction of aromatic nitro compound

   • Shanshan Sun
   • Zihao Zhang
   • Yun Chen

   Chemical routes to materials 19 March 2023 Pages: 5587 - 5598

   

4. A superhydrophobic fluorinated-silica/polyimide nanofiber membrane with ultra-low dielectric constant

   • Chengze Xu
   • Xiang Wang
   • Siyuan Zhang

   Chemical routes to materials 28 March 2023 Pages: 5599 - 5609

   

5. Development and characterisation of an alginate and expanded graphite based composite for thermochemical heat storage

   • Jack Reynolds
   • Rhodri Williams
   • Xinyuan Ke

   Composites & nanocomposites Open access 18 March 2023 Pages: 5610 - 5624

   

6. Influence of wood pretreatment, hardwood and softwood extractives on the compressive strength of fly ash-based geopolymer composite

   • Bright Asante
   • Jörn Appelt
   • Andreas Krause

   Composites & nanocomposites Open access 15 March 2023 Pages: 5625 - 5641

   

7. Effect of sizing agent on properties of basalt fiber/blended resin matrix composites

   • Hechen Liu
   • Yunfei Yu
   • Zhengbo Tian

   Composites & nanocomposites 13 March 2023 Pages: 5642 - 5657

   

8. Multiplicity of Zn coordination sites at cubic spinel ferrites: magnetism and influence of the Zn d band

   • César Tejera-Centeno
   • Rubén Rico
   • Silvia Gallego

   Computation & theory Open access 24 March 2023 Pages: 5658 - 5677

   

9. High-performance flexible smart window based on copper nanowire/multi-walled carbon nanotube transparent conducting film

   • Nguyen-Hung Tran
   • Van Chuc Nguyen
   • Hyun-Chul Kim

   Electronic materials 30 March 2023 Pages: 5678 - 5692

   

10. Optimisation of the Zr:Ti ratio in bulk lead zirconate titanate for templated grain growth using BaTiO₃ seeds

    • Edoardo F. Mantheakis
    • Beecher H. Watson III
    • Ian M. Reaney

    Electronic materials Open access 22 March 2023 Pages: 5693 - 5704

    

11. Microstructure and magnetic properties of vapor-grown CdTe:Cr crystals with doping-induced precipitates

    • K. Morawiec
    • V. D. Popovych
    • M. Shiojiri

    Electronic materials 22 March 2023 Pages: 5705 - 5717

    

12. Calcium-doped TiO₂ microspheres and near-infrared carbazole-based sensitizer for efficient co-sensitized dye-sensitized solar cell

    • Dheeraj Devadiga
    • M. Selvakumar
    • S. Senthil Kumar

    Energy materials Open access 28 March 2023 Pages: 5718 - 5734

    

13. A gradient four-layered gelatin methacrylate/agarose construct as an injectable scaffold for mimicking osteochondral tissue

    • Ali Mokhtarzade
    • Rana Imani
    • Parvin Shokrollahi

    Materials for life sciences 27 March 2023 Pages: 5735 - 5755

    

14. A good adhesion and antibacterial double-network composite hydrogel from PVA, sodium alginate and tannic acid by chemical and physical cross-linking for wound dressings

    • Minjian Liao
    • Yanyan Zhao
    • Xianming Dong

    Materials for life sciences 26 March 2023 Pages: 5756 - 5772

    

15. Copper-induced synthesis of versatile FeO_x nanozymes for catalytic cancer therapy

    • Cheng Qi
    • Wen-Han Wang
    • Jian-Jun Wang

    Materials for life sciences 27 March 2023 Pages: 5773 - 5787

    

16. Antitumor activities of novel glycyrrhetinic acid-modified lipogel hybrid system in vitro

    • Zhijie Wen
    • Hudie Fu
    • Yan Hu

    Materials for life sciences 27 March 2023 Pages: 5788 - 5807

    

17. A bioinspired multilayer film with angle dependent and humidity responsive color-changing performances based on its crosslink networks

    • Wei Wu
    • Yueming Wang
    • Jiyu Sun

    Materials for life sciences 23 March 2023 Pages: 5808 - 5821

    

18. Effect of B₄C addition on microstructure and tribological performance of laser cladded WC−10Co4Cr coatings

    • Liu Detao
    • He Chuang
    • Kong Dejun

    Metals & corrosion 22 March 2023 Pages: 5822 - 5836

    

19. Slippery surface for enhancing surface robustness and chemical stability

    • Shuwei Lv
    • Xinming Zhang
    • Ying Zhai

    Metals & corrosion 18 March 2023 Pages: 5837 - 5847

    

20. Interface microstructure regulation and bonding performance of powder metallurgy Al/Mg bimetal with Ni interlayer

    • Zhaofeng Tang
    • Lun Yang
    • Wensheng Liu

    Metals & corrosion 16 March 2023 Pages: 5848 - 5864

    

21. Processing, characterization and mechanical properties of welded steel hollow sphere-reinforced aluminum matrix composites

    • Chang Qi
    • Chen Yu
    • Li-Ping Cui

    Metals & corrosion 29 March 2023 Pages: 5865 - 5883

    

22. Evaluation of residual stress in lead frame copper strips by nanoindentation

    • Taifeng Cao
    • Peng Su
    • Junwei Qiao

    Metals & corrosion 13 March 2023 Pages: 5884 - 5900

    

23. Microstructure evolution and fracture mechanism of a Fe–Ni–Cr superalloy during various strain rates tensile deformation at elevated temperatures

    • Shuo Huang
    • Ruikang Sun
    • Yang Liu

    Metals & corrosion 13 March 2023 Pages: 5901 - 5920

    

24. Preparation of high-performance SA508 Grade 3 steel by laser powder bed fusion: role of high cooling rate on microstructure and mechanical properties

    • Yiru Liu
    • Ran Ding
    • Zongqing Ma

    Metals & corrosion 22 March 2023 Pages: 5921 - 5932

    

25. A new Nb-Si-added 2100 MPa ultra-strong spring steel designed under the guidance of a strength model

    • Ling Yuan
    • Xin You
    • Chi Zhang

    Metals & corrosion 24 March 2023 Pages: 5933 - 5950

    

26. Comparison of the stress relaxation and creep behavior of conventionally forged and additively manufactured René 65

    • Dhruv Tiparti
    • Andrew Wessman
    • Sammy Tin

    Metals & corrosion 29 March 2023 Pages: 5951 - 5969

    

27. Effect of low aging temperature and the reversion of martensite on the mechanical behavior of a 2304 lean duplex stainless steel

    • Raphael França Assumpção
    • Renata Mangini Santos
    • Dagoberto Brandão Santos

    Metals & corrosion 29 March 2023 Pages: 5970 - 5988

    

28. Identifying the influence of the ultrasonic-arc technique on the He⁺ irradiation damage resistance of CLAM steel TIG welds

    • Yongfeng Qiao
    • Hassaan Ahmad Butt
    • Hao Chen

    Metals & corrosion 29 March 2023 Pages: 5989 - 6008

    

29. Thermal treatment of electrospun polystyrene fibers: microstructural evolution and mechanical behavior

    • Juan Diego Shiraishi Lombard
    • Tianyu Liu
    • Carolina Tallon

    Polymers & biopolymers 30 March 2023 Pages: 6009 - 6024

    

30. Water behavior, thermal, structural, and viscoelastic properties of physically cross-linked chitosan hydrogels produced by NaHCO₃ as a crosslinking agent

    • Hugo Espinosa-Andrews
    • Celso Velásquez-Ordoñez
    • Rogelio Rodríguez-Rodríguez

    Polymers & biopolymers 20 March 2023 Pages: 6025 - 6037

    

31. Fabrication of decoupling coatings with robustness and superhydrophobicity for anti-icing and anti-corrosion applications

    • Lei Xin
    • Pengchang Li
    • Sirong Yu

    Polymers & biopolymers 31 March 2023 Pages: 6038 - 6054

    

32. Retraction Note: Intermetallic and dispersoid structures in aa3104 Aluminum alloy during two-step homogenisation

    • S. L. George
    • L. Chicuba

    Retraction Note 21 March 2023 Pages: 6055 - 6055